Installing the Touch Driver Software

Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operat- ing systems:

•Windows XP

•Windows 2000

•Windows Me

•Windows 98

•Windows 95

•Windows NT 4.0

•CE 2.x, 3.0, 4x

•Windows XP Embedded

•Windows 3.x

•MS DOS

•OS/2

Additional drivers and driver information for other operating systems (including Macintosh and Linux) are available on the Elo TouchSystems web site at www.elotouch. com.

Your Elo USB touchmonitor is Plug-and-Play compliant. Information on the video capabilities of your touchmonitor is sent to your video display adapter when Windows starts. If Windows detects your touchmonitor, follow the instructions on the screen to install a generic Plug-and-Play monitor.

Refer to the appropriate section for driver installation instructions.

Installing APR USB Touch Driver for Windows XP

Insert the ELO APR CD-ROM in your computer’s CD-ROM driver.

Follow the directions on the screen to complete the APR 2.0 driver setup for your version of Windows.

1Click Start > Run.

2Click the Browse button to locate the SW600117.exe program on the CD-ROM.

3Click Open, then OK to run SW600117.exe.

4Follow the directions on the screen to complete the driver setup for your version of Windows.

2-18 Elo Touchmonitor User Guide

Page 24
Image 24
Elo TouchSystems 1522L manual Installing the Touch Driver Software, Installing APR USB Touch Driver for Windows XP