Param Number
Permanent
Param Change
New Value
5.In the box labeled Param Number, enter the value 238.
6.In the box labeled New Value, enter the value 1.
7.Check the box labeled Permanent Param Change.
8.Scan a barcode (sample given below). The scanned data should appear in the “Messages” section of SSIContainer screen.
The barcode scanner also has the ability to run in
1.Click the 1xDx Setup Files folder on the desktop.
2.Then click the Barcode Scanner folder.
3.Finally, click the Keyboard Emulation Setup Files folder, where you can find setup instructions to complete the installation process.
![Elo TouchSystems D-Series Rev.C] manual Param Number Permanent Param Change New Value](/prints/elo-touchsystems-d-series-revc/1165441/34.1080/d-series-revc-manual.1080.webp)