Elo TouchSystems D-Series Rev.C] manual 15D1 Touchcomputer User Guide

7.Then press “Enter”.

8.Follow the on-screen instructions to complete the recovery.

9.Once you are prompted to reboot:

•Remove the recovery DVD from your DVD drive

•Shut down your touchcomputer by pressing and holding the power button for 5 seconds

•Disconnect the DVD drive from your touchcomputer

•Restart your touchcomputer by pressing the power button

10.Follow the on-screen instructions to setup your system.

NOTE: All data is deleted during the recovery process. The user must back up files when necessary. Elo TouchSystems does not accept liability for lost data or software.

NOTE: If your hard disk is corrupted, you can request a Recovery DVD from Elo TouchSystems customer service.

NOTE: The end user must adhere to Microsoft's Licensing Agreement.

NOTE: After recovering your touchcomputer by using the included image, the operating system may reassign your USB Serial Ports during the first bootup. You can follow the instructions below to reassign them manually.

15D1 TOUCHCOMPUTER USER GUIDE 41