Elo TouchSystems ET1546L-XXWA-X manual Force Surface Durability Expected Life Performance Sealing

Table C.2 IntelliTouch Touchmonitor Specifications

Mechanical

Positional Accuracy Standard deviation of error is less than 0.080 in. (2.03 mm). Equates to less than ±1%.

Touchpoint Density More than 100,000 touchpoints/in2 (15,500 touchpoints/cm2).

Touch Activation Typically less than 3 ounces (85 grams).

Force

Surface Durability

Expected Life

Performance

Sealing

Surface durability is that of glass, Mohs’ hardness rating of 7.

No known wear-out mechanism, as there are no layers, coatings, or moving parts. IntelliTouch technology has been operationally tested to more than 50 million touches in one location without failure, using a stylus similar to a finger.

Unit is sealed to protect against splashed liquids, dirt, and dust. See IntelliTouch Ultra Product Manual for details.

Optical

Light Transmission (per ASTM D1003)

Visual Resolution

Gloss (per ASTM D2457 using a 60- degree gloss meter)

Environmental

Chemical Resistance

Electrostatic

Protection (per

EN 61 000-4-2, 1995)

92%

All measurements made using USAF 1951 Resolution Chart, under 30X magnification, with test unit located approximately 1.5 in (38 mm) from surface of resolution chart.

Clear surface: Excellent, with no noticeable degradation.

Antiglare surface: 6:1 minimum.

Clear surface: N/A

Antiglare surface: Curved: 60 ± 20 gloss units or 75 ± 15 gloss units.

The active area of the touchscreen is resistant to all chemicals that do not affect glass, such as:

Acetone

Toluene

Methyl ethyl ketone

Isopropyl alcohol

Methyl alcohol

Ethyl acetate

Ammonia-based glass cleaners

Gasoline

Kerosene

Vinegar

Meets Level 4 (15 kV air/8 kV contact discharges).

C-35