Connector Panel & Interfaces
Touchmonitor Connections
1.Connect the DVI or VGA video cables between the monitor’s DVI/VGA input connectors and your DVI/VGA video source. Tighten the video cable’s screws for best performance.
2.Connect the USB touch cable between the monitor’s USB connector and your PC’s USB port.
3.Connect a 12VDC power supply to the monitor’s input power jack.
4.The touchmonitor ships in an ON state, video should be displayed on your monitor already.
User Manual: 1930L/1931L
SW602163 Rev A, Page 6 of 33
