Elta 2311 manual 011, Sensor window of the receiver, Precautions concerning batteries

02-2311-EN 12/2/05 11:09 AM Page 011

The triangular symbol with the lightning Bolt warns the user to the presence of dangerous non- isolated voltage on the inside of this device which may cause an

electric shock.

WARNING

DANGER OF A HAZARDOUS ELECTRIC

SHOCK. DO NOT OPEN

WARNING: TO REDUCE THE RISK OF AN ELECTRIC SHOCK, DO NOT REMOVE THE FRONT OR BACK COVER. INSIDE THE UNIT, THERE ARE NO PARTS THAT CAN BE REPAIRED OR ADJUSTED BY THE USER. PLEASE REFER TO QUALIFIED TECHNICIANS.

The triangular symbol with the exclamation highlights important points of which the user should refer to the manual regarding maintenance and repair.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING.

Note:

This unit will become warm when used for a long period of time. This is normal and does not indicate a problem with the unit.

This CD player includes micro-processors which may malfunction as a result of external electrical interference or noise. If the CD player is not working properly, disconnect the power source and then reconnect it.

SENSOR window of the receiver

Note:

•Even if the remote control unit is operated within the effective range, remote control operation may be impossible if there are any obstacles between the unit and the remote control.

•If the remote control unit is operated near other appliances which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly.

Precautions concerning batteries

•Be sure to insert the batteries with correct positive “+” and negative “-“ polarities.

•Use batteries of the same type. Never use different types of batteries together.

•When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries and never dispose of old batteries by throwing them in a fire.

Battery Installation

1.Remove the battery compartment cover.

2.Insert two “AAA” dry batteries.

•Make sure that the batteries are inserted with their positive “+” and negative “-“ poles positioned correctly.

3.Close the cover until it clicks.

•If the distance required between the remote control unit and main unit decreases, the batteries are exhausted. In this case replace the batteries with new ones.

Main Unit Battery Backup

1.Remove the battery compartment cover.

2.Insert one "Cell" dry battery.

Make sure that the batteries are inserted with their positive "+" and Negative "-" poles positioned correctly.

3.Close the cover until it "Clicks".

￿011.