02-2322_EN 6/20/06 11:20 AM Page 06

PROGRAM key [Function Explanation]

1.If [PROGRAM] key is pressed during the CD stop mode, the system goes to the program mode. During the program mode, the track number and PROGRAM display will flash in the 500[ms] interval (Display 1).

2.If [FF/SKIP+] / [FB/SKIP-] key is pressed, the system chooses the track number which it wants to register.

3.If [PROGRAM] key is pressed after choosing a track number, the system keeps the track number, and goes to next program mode (Display 2).

4.The system can hold 10 programs for CD Mode / 10 programs for MP3. After the system held 20 programs, it can’t keep another song. During the system holding 20 programs, it can't keep other program. PROGRAM display and “P 01“ will flash in the 500[ms] interval

5.If [STOP] key is pressed during the program mode, the system removes the contents of the program, and cancels the program mode.

6.If [PLAY/PAUSE] key is pressed during the system holding the program of more than one, it starts the program play. During the program play, Display shows PROGRAM is play (display 4).

7.If [FF/SKIP+] / [FB/SKIP-] key is pressed during the program play, the system skips to next / previous program.

8.If [STOP] key is pressed during the program play, the system stops the program play, and goes the stop mode. Until [STOP] key is pressed during the stop mode, the system keeps the contents of the program.

PROGRAM

PROGRAM

PROGRAM

PROGRAM

(DISPLAY 1 )

(DISPLAY 2 )

(DISPLAY 3 )

(DISPLAY 4 )

MODE key [Function Explanation]

CD Mode:

1. If [MODE] key is pressed, the system changes the mode(as follows intention).

 

 

RANDOM

REP

REP

 

 

ALL

 

NO REPEAT& RANDOM REPEAT-1

REPEAT ALL

RANDOM

2.During the repeat-1 mode, the system repeats the current track of the CD.

3.During the repeat-all mode, if it reaches the end of the tune of the final track, it is usually returned to the head track.

4.If whole track was finished during the random play mode or if [STOP] key is pressed during the random play mode, the system goes to the stop mode and cancels the random play mode.

5.If [FF/SKIP+] key is pressed during the random play mode, the system skips next at random. If [FF/SKIP+] key is pressed on the tune of the final track, the system searches next lap at random.

6.If [FB/SKIP-] key is pressed during the random play mode, the system searches the beginning of the current track, but doesn’t skip track down.

016.

Page 16
Image 16
Elta 2322 manual Program key Function Explanation