Elta 2954 Connections Power Connection, Loudspeaker Jack L/R, Aux Outlet, General, On/Off Button

2954 9/12/06 5:05 PM Page 08

CONNECTIONS

POWER CONNECTION

Only connect the power cable to the AC outlet.

LOUDSPEAKER JACK L/R

When you want to use external loudspeakers, connect then to the LOUDSPEAKER JACKS (12), which can be found on the back of the machine. This machine should not be connected to loudspeakers which have an impedance of less than 8 ohm, otherwise the machine can be damaged. External loudspeakers are always activated together with the built-in ones.

AUX OUTLET

To connect the record player to a hi-fi system or an amplifier, please go about it in the following manner. Connect the AUX OUTLET (13) of the record player to the AUX OUTLET of a hi-fi system or amplifier. Use a designated audio cable. Turn the Speaker/Aux switch (11) to the Aux position to activate the sound output through the AUX outlet. When the Speaker/Aux switch (11) is in the Speaker position, sound with be emitted through the built-in and external (if connected) loudspeakers.

GENERAL
ON/OFF BUTTON (5)	– Press the button to turn the machine on or off. The
	operation display (6) will light up when the machine is
	turned on.
VOLUME REGULATOR (2)	– Controls the loudspeaker volume.
FUNCTION SELECTION SWITCH (3)	– Select the desired source
	AM: AM radio
	FM: FM radio
	Auto-stop ON: record player with activated auto-stop. The
	record motor will automatically turn off when the tone arm
	is near the middle of the record.
	Auto Stop OFF: Turntable with deactivated auto stop. The
	disc motor does not stop automatically, in order to be able
	to play discs with overlength.

TUNER

1.Press the ON/OFF SWITCH (5) to turn on.

2.To select the desired frequency, turn the FUNCTION SELECTION SWITCH (3) to the desired frequency band.

3.Press the FREQUENCY REGULATOR (7) to set the desired station.

4.Regulate the volume with the LOUDSPEAKER REGULATOR (2).

TIPS FOR OPTIMAL RECEPTION

FM: The receptor has an FM wire antenna on the backside of the encasing. This antenna should be completely unwound for optimal reception.

AM: The machine has a built-in beam antenna. Turn the machine to find the position for the most optimal reception.

08.