SETTING THE CLOCK
Time is displayed in
1.Press and hold CLOCK until you see the hour digits blinking in the display. The display will return to normal mode if there is no operation within 5 seconds.
2.Press 
to adjust the hours (or press and hold for quick adjustment).
3.Press CLOCK to confirm the hour settings. Now the minute digits are blinking in the display.
4.Press 
to adjust the minutes (or press and hold for quick adjustment).
5.Press CLOCK to confirm your settings.
RADIO RECEPTION
1.Press POWER to turn on the unit. The display lights up.
2.Set the FUNCTION SELECTOR to RADIO position; the display shows TUNER.
3.Set the BAND to FM ST., FM or AM.
4.Search your desired station using the TUNING knob.
5.Use VOLUME to adjust the volume settings.
6.Press DISPLAY twice to display the radio station information. The display will show the frequency range and frequency for a few seconds, then returns to display of time.
7.Press POWER to turn off
IMPROVE RADIO RECEPTION
FM: Completely uncoil the wire antenna for best reception.
AM: The unit uses a
CD PLAYBACK
1.Press POWER to turn on the unit. The display lights up.
2.Set the FUNCTION SELECTOR to CD position; the display shows Cd.
3.Open the door of the CD drive.
4.Insert a disk with the printed side facing up and close the door of the CD drive. The unit shortly displays CD and then starts playback automatically.
5.If playback does not start automatically, please press 
for playback.
6.Press DISPLAY twice to display theCD track information. After a few seconds the unit returns to display of time.
7.Use VOLUME to adjust volume settings.
8.To temporary pause playback (pause), press 
. Press 
again to resume playback at the same position. The track number is blinking in the display.
9.Press 
to completely stop playback. The display shows the total number of tracks.
10.Press POWER to turn off CD playback
Skip to a certain track
•Use 
to skip to previous or next track; numbers are shown in the display.
•During stop mode press 
to select a track and then press 
to start playback.
Search a certain position within a track
1.During playback press and hold 
or 
. The CD will fast rewind or fast forward at higher speed and reduced volume.
2.The unit will resume normal playback when you release the buttons 
or 
.
PROGRAMMING TRACKS
You can program up to 20 tracks in arbitrary order. Multiple programming of one track is possible.
1.During stop mode press PROG; the display will show PROG and P01.
2.Use 
or 
to select a desired track.
3.Press PROG to store the track. 002 appears in the display; you can now store the second track.
4.Repeat steps 2 and 3 to select and store the desired tracks. You can store up to 20 tracks.
5.Press 
to start program playback; PROG appears in the display.
DELETE THE PRESET TRACKS
During stop mode press PROG to recall all preset tracks, and press 
, or open the CD drive, or press POWER, or set the FUNCTION SELECTOR to RADIO, USB or BUZZER.
SELECT DIFFERENT PLAYBACK MODES: REPEAT AND SHUFFLE
You can select a playback mode prior or during playback. You can combine repeat and program functions.
SHUFFLE: Play all tracks in arbitrary order.
REPEAT: Repeat current track.
REPEAT ALL: Repeat complete disc.
SHUFFLE REPEAT ALL: Repeat all tracks of the disc in arbitrary order.
CONTINUOUS REPEAT AND RANDOM REPEAT FUNCTION
1.Press SHUF/REP once or repeatedly to select a playback mode. The different playback modes appear in the display respectively.
2.Press 
during stop mode to start playback. During shuffle mode playback starts automatically after a few seconds.
3.To return to normal playback, repeatedly press SHUF/REP until the playback modes disappear from the display. By pressing 
you can also return to normal playback.
Note:
When you select the shuffle mode during playback, it will not be activated until the current track has elapsed. The shuffle mode is not available during program playback.
CONNECTING AUXILIARY DEVICES
You can also connect auxiliary devices for audio playback on the speakers of the clock radio.
1.Press POWER to turn on the unit. The display lights up.
2.Connect the supplied
earphone output jack of the auxiliary device (CD player, video recorder, etc.).
AUX appears in the display.
The AUX mode overruns the activated CD or radio mode.
MP3 PLAYBACK FROM USB REMOVABLE DISK
1.Press POWER to turn on the unit. The display lights up.
2.Set the FUNCTION SELECTOR to USB; the unit shortly displays USB and then returns to display of time.
3.Connect your USB device to the USB port; the display shows USB and WMA or MP3, depending on the format.
4.Make sure your USB device contains MP3 music files in MP3 or WMA format.
5.The unit decodes the first file and automatically starts playback. If playback does not start automatically, please press 
.
6.Press 
or 
to skip to previous or next file; press 
to start or pause playback; press 
to stop playback.
7.During pause mode the file number is blinking in the display.
MP3 PLAYBACK FROM MP3 PLAYER
1.Connect your MP3 player to the USB port using the USB cable (battery of MP3 player will not recharge).
2.You can control playback using the control buttons on the clock radio (as described above).
20. |
| 21. |
|
|
|
