MP3 CD PLAYBACK

1Set the FUNCTION selector to CD / MP3 / USB / SD position. The display shows “- - -” for a moment.

2.Open the CD compartment manually with the recessed grip OPEN; OP is displayed.

3.Insert an MP3 CD with the label up and close the CD compartment again manually. The display shows MP3, ► and 001 and playback starts automatically. The corresponding track number is displayed.

4.In case playback does not start (depending on the disc), please press PLAY / PAUSE to start playback of the first track manually.

5.Press PLAY / PAUSE to pause playback; press again to continue playback. In pause mode ► flashes.

6.Press STOP to stop playback; the display shows again the total number of tracks.

Notes: MP3 CD playback is also stopped when:

a. opening the CD compartment;

b. sliding the FUNCTION selector to RADIO or TAPE / OFF positions; c. all tracks on the MP3 CD have been played.

Skip Mode

In playback mode press SKIP- or SKIP+ to skip to the previous or next track.

1.Select the track in playback, stop or pause modes with SKIP- or SKIP+ and start playback by pressing PLAY / PAUSE.

2.Press SKIP+ repeatedly to skip to the next track(s), until the desired track number is displayed.

3.Press SKIP- once to skip to beginning of the current track.

4.Press SKIP- repeatedly to skip to the previous track(s).

5.Press ALBUM to display the corresponding album and select a track with SKIP- or SKIP.

Fast Forward And Rewind

Press and hold SKIP+ or SKIP- to access fast forward or rewind functions through the track to search for a certain position.

Program Playback

Up to 20 tracks can be programmed in your desired sequence; any track can be programmed more than once.

1.Before programming, please press STOP and MODE. The display shows P01 and PROG.

2.Select the first desired track with SKIP+ or SKIP-.

3.Save the track with MODE. P02 and PROG flash in the display. Now select the next track.

4.Repeat steps 2 and 3 to save further tracks, the maximum number of tracks is 20.

5.Press PLAY / PAUSE to start playback of the tracks in your desired sequence.

Delete Program

Follow these steps to delete the program:

1.Open the CD compartment.

2.Set the FUNCTION selector to RADIO or TAPE / OFF positions.

3.Press STOP.

Notes for CD-R / CD-RW users:

Depending on CD burner, make of CD and burner speed, reading problems may occur.

Playback Modes

Several playback modes are available on the unit; press MODE to access and select.

1.Press MODE once to repeat the current track. The display shows REP besides track number, MP3 and ►.

2.Press MODE twice to repeat the tracks in the current album. The display shows REP and ALBUM besides track number, MP3 and ►.

3.Press MODE three times to repeat the disc in its original sequence. The display shows REP ALL besides track number, MP3 and ►.

4.Press MODE four times to play all tracks on the disc once in random sequence. The display shows RAND besides track number, MP3 and ►.

5.Press MODE again to return to normal playback mode. The display shows again track number, MP3 and ►.

Playback From USB Device Or SD Memory Card

The CD player can play MP3 music files from USB device and SD memory cards. Connect the USB device to the USB port on top of the player or insert the SD memory card in the SD slot on top of the player.

Set the FUNCTION selector to CD / MP3 / USB / SD position. You have the same playback functions as you have in MP3 CD playback. Please read details in the previous chapters MP3 CD Playback, Skip Mode, Fast Forward And Rewind, Program Playback, Delete Program and Playback Modes.

CASSETTE OPERATION

Insert Tape

1.Set the FUNCTION selector to TAPE / OFF position.

2.Press STOP / EJ. to open the cassette deck.

3.Insert a tape and close the deck manually.

Side A

Side B

Playback

1.Set the FUNCTION selector to TAPE / OFF position.

2.Insert a tape as described above.

3.Press PLAY ◄ to start playback. Playback stops automatically at the end of the tape.

4.Press VOLUME + / - to set the desired volume.

5.Press STOP / EJ. to stop playback prior to the end of the tape.

Fast Forward / Rewind

1.Press RWD to activate rewind function of the tape.

2.Press F.FWD to activate fast forward function of the tape.

3.Press STOP / EJ. to stop fast forward / rewind.

Record

Please ensure the write protection tab is still in place.

Press REC to simultaneously activate PLAY ◄. If the inserted tape is write-protected both buttons will not lock in place and no recording is possible.

24.

 

25.

 

 

 

Page 12 Page 14
Page 13
Image 13
Elta 6733 manual MP3 CD Playback, Cassette Operation
Page 12 Page 14

6733 specifications

The Elta 6733 is a sophisticated airborne surveillance radar system developed by Elta Systems, a subsidiary of Israel Aerospace Industries. This cutting-edge radar stands out for its advanced detection, tracking, and classification capabilities, catering to a variety of military and civilian applications, including air traffic control, border security, and maritime surveillance.

One of the key features of the Elta 6733 is its Phased Array Radar technology, which allows for rapid beam steering without mechanical movement. This capability enables the radar to scan large areas quickly and maintain continuous tracking of multiple targets simultaneously. The technology enhances the system’s reliability and operational efficiency, making it ideal for scenarios where rapid response is crucial.

The Elta 6733 is designed with an advanced digital signal processing capability, which significantly improves target discrimination in cluttered environments. This feature allows the radar to distinguish between various types of targets, such as aircraft, drones, and ground vehicles, even in adverse weather conditions or dense clutter.

Additionally, the radar boasts an impressive coverage range. Depending on the operational mode, the Elta 6733 can effectively monitor and track targets at distances exceeding 250 kilometers. This extensive range is further complemented by its high spatial resolution, ensuring that even smaller objects can be detected and identified accurately.

The system's modular design enhances its versatility, allowing it to be easily integrated into various platforms, including unmanned aerial vehicles (UAVs), helicopters, and fixed-wing aircraft. This adaptability makes the Elta 6733 a valuable asset in diverse operational environments.

Another notable characteristic is its ease of use. The Elta 6733 comes equipped with user-friendly interfaces and operational tools that streamline mission planning and execution. This focus on usability ensures that operators can quickly adapt to changing situations in the field.

In terms of robustness, the Elta 6733 is built to endure harsh environmental conditions. Its weather-resistant features ensure reliable performance in challenging climates, further increasing its operational readiness.

Overall, the Elta 6733 represents a significant advancement in radar technology, combining innovative features, advanced processing capabilities, and robust technical specifications. Its effectiveness in diverse applications marks it as a crucial tool in modern surveillance and reconnaissance missions.
Top Page Image Contents