LOCATION OF CONTROLS AND FUNCTIONS
1. SEL (MODE SELECT) / VOLUME +/-
(1)Press SEL repeatedly to access the modes: VOL → BAS → TRB → BAL → FAD
1)VOLUME CONTROL
A.The volume level can be adjusted at any time by pressing + or - as the select mode has been initially defaulted at volume mode.
B.The volume level can also be adjusted by cycling through the SEL modes until VOL is displayed; now press + or - to adjust the sound level.
2)BASS
A.Press SEL repeatedly until BAS is displayed.
B.Adjust the bass level with + or
3)TREBLE
A.Press SEL repeatedly until TRE is displayed.
B.Adjust the treble level with + or
4)BALANCE
A.Press SEL repeatedly until BAL is displayed.
B.Adjust the balance setting with + or
5)FADER
A.Press SEL repeatedly until FAD is displayed.
B.Adjust the fader setting with + or
(2)Press and hold SEL for more than 2 seconds to access TA SEEK/TA ALARM mode, then repeatedly press SEL to select PI SOUND/PI MUTE, RETUNE L/RETUNE S, MASK DPI/MASK ALL, BEEP 2ND/BEEP ALL/BEEP OFF, SEEK1 /SEEK2 (in radio mode), DSP OFF/FLAT/POP M/CLASSICS/ROCK, LOUD OFF/LOUD ON, SUBW OFF/ON (with optional subwoofer output), STEREO/MONO (in radio mode), DX/LOCAL (in radio mode), VOL LAST/ VOL ADJUST (in VOL ADJUST mode the next mode will be
1)TA SEEK / TA ALARM:
TA SEEK: If a newly tuned station does not receive TP information for 5 seconds, the radio retunes to the next station, which has not the same PI code as the previous station, but contains TP information.
If the TP information gets lost at the current station in RETUNE S (60 seconds) or RETUNE L (90 seconds) setting, the radio starts to retune to next station with the same PI code. If the same PI station is not found during 1 search cycle, the radio retunes to next station with TP information.
TA ALARM: In this mode the automatic retune mode is not activated, only a double beep (alarm) is sounded.
If the newly tuned station does not receive TP information for 5 seconds, the radio retunes to next station which has not the same PI code as the last station, but contains TP information. If the newly tuned station has no RDS signal, PI SEEK is suppressed.
2)PI SOUND / PI MUTE:
PI SOUND: When cruising the critical area back and forth, the same PI code may be received from different stations. In PI SOUND setting a short switching sound will be heard. PI MUTE: In PI MUTE setting no switching sound is audible.
3)RETUNE L / RETUNE S:
The initial time of automatic retune after losing a TA signal. When the same PI station cannot be found within 1 search cycle, the radio tunes to previous station and waits for
RETUNE L: 90 seconds.
RETUNE S: 60 seconds.
4)MASK DPI / MASK ALL:
MASK DPI: Masking only alternative frequencies with different PI code.
MASK ALL: Masking alternative frequencies with different PI code and no RDS signal.
5)BEEP 2ND / BEEP ALL / BEEP OFF:
BEEP 2ND: Key tone is only generated when a second key function is pressed.
BEEP ALL: Key tone is activated (except POWER and release buttons).
BEEP OFF: Key tone is deactivated.
6)SEEK1 / SEEK2:
SEEK1: Press and hold 
/ 
to search for a station with stronger signal. On reception of a stronger signal the search is stopped.
SEEK2: Press 
/ 
to search for a station with a stronger signal. On reception of a stronger signal the search is not stopped. After releasing the button the next station with a strong signal is tuned into.
2.RELEASE BUTTON FRONT PANEL Press to release the front panel.
3.LCD (LIQUID CRYSTAL DISPLAY)
4.
/ 
BUTTONS
1)In radio mode repeatedly press 
/ 
to manually tune up or down to the desired radio station. Press and hold 
/ 
for more than 0.5 seconds to automatically tune up or down to the radio station.
2)In disc mode press 
to play the next track. Press 
once to play the current track from the beginning, press 
twice to play the previous track. Press and hold 
/ 
to search forward or backward.
22. |
| 23. |
|
|
|
