Elta WK101N1 approved, Special Safety Advice, Caution Danger, burns, Prior To First Use

Models: WK101N1

1 18
Download 18 pages 20.29 Kb
Page 4
Image 4
 SPECIAL SAFETY ADVICE

GB

For extra protection it is possible to fit the electric household installation with a fault current breaker with a rated breaking current of not more than 30mA. Ask your electrician for advice.

Make sure that there is no danger that the cord or extension cord may inadvertently be pulled or cause anyone to trip when in use.

If an extension cord is used it must be suited to the power consumption of the appliance, otherwise overheating of the extension cord and/or plug may occur.

This appliance is not suitable for commercial use nor for use in the open air.

Never leave the appliance unattended while it is in use.

Children cannot recognise the dangers involved in the incorrect use of electrical appliances. Therefore never allow children to use household appliances without supervision.

Always remove the plug from the socket when the appliance is not in use and each time before it is cleaned.

Danger! Nominal voltage is still present in the appliance as long as the appliance is connected to the mains socket.

Switch the appliance off before disconnecting from the mains.

Never use the cord to carry the appliance.

•Caution: Danger, burns! PRIOR TO FIRST USE SPECIAL SAFETY ADVICE

Only use the water kettle with the supplied base station (6). Do not use the base station (6) for other purposes.

Never fill water into the water kettle while it is placed on the base station (6). Always remove the water kettle from the base station (6) before filling.

The water level must under no circumstances be above or below the respective markings of the water level indicator MIN/MAX (8).

Only fill the water kettle with cold water.

Do not use the water kettle to heat other liquids except water.

Caution: Danger, burns!

The water kettle becomes very hot during use. Hot steam emerges from the spout (9). Therefore, only pick up the water kettle by its handle (3).

Only use the water kettle with the lid (2) securely closed.

Switch off the water kettle prior to removing it from the base station.

 CLEANING AND MAINTENANCE TECHNICAL DATA PRIOR TO FIRST USE

Remove all packaging materials.

Cleaning the water kettle before first use, fill it with clean water and boil at least 4 times in a row. (see Use). Then, pour away water.

Afterwards, clean the appliance as described under Cleaning and Maintenance.

 GUARANTEE AND CUSTOMER SERVICEapproved USE

Connect the power plug (7) to a suitable outlet.

Remove water kettle from the base station (6).

Pull the lid’s unlocking device back and open the lid (2).

Fill with the desired amount of water. While doing this, check the kettle’s water level indicator MIN/MAX (8). The water level must neither be below the minimum marking MIN nor above the maximum marking MAX.

Close the lid (2) until it locks into place.

Place the water kettle on the base station (6).

Switch the on/off switch I/0 (4) to the lower position. The operation display (5) lights up. The appliance is switched on.

The water kettle switches off automatically as soon as the water boils. The on/off switch I/0 (4) switches off automatically. The operation display’s (5) illumination goes off.

The water can be poured out of the spout (9) without opening the lid (2). The filter (10) prevents residues of calcium etc. from being poured out of the spout.

To stop the device before boiling, switch the on/off switch I/0 (4) to the upper position.

5

GB

Manual backgroundManual background CLEANING AND MAINTENANCE

In addition to this you must observe the Safety advice.

Prior to cleaning the base station, always remove the power plug (7) from the outlet.

Let the water kettle cool down completely before cleaning.

Clean the outer case with a soft, moistened cloth and mild cleaning detergent.

Never use abrasive cleaning agents or hard utensils.

The filter (10) can be removed. Pull it upwards out of the grooves. Rinse the filter (10) with running water. Put the filter into the water kettle until it securely locks into place.

Regularly decalcify the appliance. For this, you may use a decalcifying agent (available at specialist retailers); follow the manufacturer’s instructions. Instead of the decalcifying agent you can also use a vinegar solution - one third vinegar and two thirds water.

Leave the mixture in the water kettle over night. Pour out mixture the next morning.

Fill the kettle with fresh, clean water. Bring to the boil again.

Pour our water with remaining vinegar and calcium residues.

Rinse water kettle with clean water.

Manual backgroundManual background TECHNICAL DATA

Operating voltage

:

230 V~ 50 Hz

Energy consumption

:

2000 Watt

Minimum water fill level

:

0.5 litres

Maximum water fill level

:

1.7 litres

Manual backgroundManual background GUARANTEE AND CUSTOMER SERVICE

Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred during production or transportation, please return the device to your dealer. In addition to statutory legal rights, the purchaser has an option to claim under the terms of the following guarantee:

For the purchased device we provide 2 years guarantee, commencing from the day of sale. During this period we will remedy all defects free of charge, which can be demonstrably attributed to material or manufacturing defects, by repair or exchange.

Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs by third parties or the fitting of non-original parts, are not covered by this guarantee.

approved

6

Page 4
Image 4
Elta WK101N1 approved, Special Safety Advice, Caution Danger, burns, Prior To First Use, Cleaning And Maintenance