EMC QLogic Installing and Configuring the HBA Driver

Installing and Configuring the HBA Driver

2-1

Invisible Body Tag

This chapter describes the procedures for installing an

EMC-approved QLogic host bus adapter (HBA) into a Windows NT,

Windows 2000, or Windows 2003 host environment and configuring

the Windows host for connection to an EMC storage array over Fibre

Channel.

◆Introduction........................................................................................2-2

◆Installing an HBA...............................................................................2-3

◆EMC HBA Settings.............................................................................2-8

◆Installing the HBA Driver...............................................................2-14

◆Updating the HBA Driver in a Windows 2000 or Windows 2003

Host....................................................................................................2-18

◆Upgrading to Windows 2003 from Windows 2000 or

WindowsNT 4.0 ...............................................................................2-20

◆Replacing an HBA............................................................................2-21

Installing andConfiguring the HBADriver

QLogic_Windows.book Page 1 Thursday, March 10, 2005 10:31 AM