TROUBLESHOOTING
Symptom | Possible Cause | Corrective Action |
|
| |
|
|
|
| ||
Forgot Keypad |
| CAUTION: This resets the thermostat to factory |
| ||
Lockout Code |
| default settings of the configuration menu. After |
| ||
|
| performing this reset, the thermostat will require |
| ||
|
| configuration again. Be sure that you know the |
| ||
|
| required configuration settings before resetting. |
| ||
|
| With the thermostat in any mode, press | and | at | |
|
| the same time to enter the configuration menu at the | |||
|
| point where the lockout code is to be entered. Press | |||
|
| and | and SYSTEM button at the same time to | ||
|
| reset the lockout code, unlock the keypad and reset | |||
|
| all configuration menu settings. |
|
| |
|
|
|
| ||
Why won't my 2nd or 3rd | First Stage is keeping up with | Your thermostat is designed to determine the |
| ||
stage come on? | demand | optimum time to activate the second stage. Simply |
| ||
|
| raising the temperature in heating or lowering it in |
| ||
|
| cooling will not always force the thermostat to bring | |||
|
| the second stage on quickly. There is a time delay |
| ||
|
| from | |||
|
| the first stage of the system. |
|
| |
|
|
|
|
|
|
FAQ
Symptom | Corrective Action |
|
|
My thermostat is reading in Celsius. | Your thermostat display can be set to display temperature in Fahrenheit or |
How do I change it to Fahrenheit? | Celsius. This option can be set in the INSTALLER/CONFIGURATION MENU |
| of your thermostat. See page 6 step 12. |
|
|
My display light does not work. Can it be | Because it is soldered to the circuit board it is not possible to repair or |
fixed or replaced? | replace. |
|
|
My setpoint temperature is flashing. | When the thermostat compressor time delay occurs it will flash the setpoint |
What does that mean? | for about five minutes. This is intended to help protect the compressor from |
| short cycling. |
|
|
How can I get a copy of the Operating | Visit our website at |
Manual for my thermostat? |
|
|
|
10