INTRODUCTION
The Emerson Media Air Cleaner comes complete with a 4” media furnace air fi lter. This fi lter must be changed every three to six months to maintain effi ciency of the fi lter and furnace system.
Please read instructions before installing and using the Air Filter Compartment.
!CAUTION
The fiber filter used in this cabinet for air cleaning must be replaced every 90 to 180 days. Your heating and cooling efficiency will decrease due to insufficient air flow when filter becomes dirty.
!WARNING
Do not attempt installation of this unit unless you are familiar with the necessary tools, equipment, and potential hazards.
Installation should be performed only by a qualified service provider.
Failure to do so could result in reduced performance of the unit, serious personal injury or death.
GUARANTEE
Emerson will not assume any responsibility for component failures due to incorrect installation procedures.
RULES FOR SAFE INSTALLATION
AND OPERATION
1.Read the Owners Manual and the Rules for Safe Operation carefully. Failure to follow these rules and instructions could cause a malfunction of fi lter or unsatisfactory service.
!WARNING
Installation of this unit must comply with local electric codes or other applicable codes.
Review and understand local codes prior to installation.
!WARNING
Before installing or servicing, always shut off electricity. This will prevent any electrical shocks.
2.Follow a regular service and maintenance schedule for effi cient operation.
TABLE OF CONTENTS |
|
Rules for Safe Installation and Operation | 2 |
How the Air Filter Works | 3 |
Construction of the Air Filter Compartment | 3 |
Preinstallation | 4 |
Installation | 6 |
Maintenance | 6 |
BASIC TOOLS REQUIRED
•Tin Snip
•Screwdriver
•Ruler or Tape Measure
•Drill
DID YOU GET THE RIGHT SIZE
AIR FILTER COMPARTMENT
Model ACM1000M are designed for heating or cooling blowers delivering 600 to 1200 cubic feet of air per minute (cfm.)
Model ACM1400M are designed for heating or cooling blowers delivering 1000 to 1600 cfm.
Model ACM1600M are designed for heating or cooling blowers delivering 1200 to 1800 cfm.
Model ACM2000M are designed for heating or cooling blowers delivering 1600 to 2200 cfm.
Before installing the fi lter, make sure you have selected the proper size unit for your heating and cooling system requirements. See specifi cations on page 4.
2
