
Application Engineering |
|
|
|
B U L L E | T | I | N |
Instructions Pertaining to Risk of Electrical Shock, Fire, or Injury to Persons
AE4-1395
WARNING
ELECTRICAL SHOCK HAZARD
•Failure to follow these warnings could result in serious personal injury.
•Disconnect and lock out power before servicing.
•Discharge all capacitors before servicing.
•Use compressor with grounded system only.
•Molded electrical plug must be used when required.
•Refer to original equipment wiring diagrams.
•
WARNING
PRESSURIZED SYSTEM HAZARD
•Failure to follow these warnings could result in serious personal injury.
•System contains refrigerant and oil under pressure.
•Remove refrigerant from both the high and low compressor side before removing compressor.
•
•Never install a system and leave it unattended when it has no charge, a holding charge, or with the service valves closed without electrically locking out the system.
•Use only approved refrigerants and refrigeration oils.
•Personal safety equipment must be used.
WARNING
BURN HAZARD
•Failure to follow these warnings could result in serious personal injury or property damage.
•Do not touch the compressor until it has cooled down.
•Ensure that materials and wiring do not touch high temperature areas of the compressor.
•Use caution when brazing system components.
•Personal safety equipment must be used.
CAUTION
COMPRESSOR HANDLING
•Failure to follow these warnings could result in personal injury or property damage.
•Use the appropriate lifting devices to move compressors.
•Personal safety equipment must be used.
Safety Statements
• Refrigerant compressors must be employed only for their intended use.
•
install, commission and maintain this equipment.
•
•All valid standards and codes for installing, servicing, and maintaining electrical and refrigeration equipment must be observed.
© 2012 Emerson Climate Technologies, Inc. | 3 |
Printed in the U.S.A. |
|