SPECIAL FEATURES
COPYING A VIDEO TAPE
VCR
You can make copies of video tapes made by friends or relatives for your enjoyment.
You can not copy a DVD to a videotape.
Warning:
Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
Connect the recording VCR (this unit), the playing VCR (another source) and your TV using the follow- ing diagram.
¡You can use the AUDIO/VIDEO input jacks on the front panel of the DVD/VCR instead of using the jacks on the back.
[Recording VCR]
(this unit)
DVD/VCR | VCR |
| DVD |
|
AUDIO OUT | AUDIO IN | DIGITAL | ||
| OUT VIDEO OUT | OUT | AUDIO OUT | |
L | L | Y |
|
|
R | R | Cb | L |
|
|
|
| COAXIAL | |
| VIDEO IN | Cr | R |
|
RF cable
(supplied) Audio/Video cables (not supplied)
[TV set]
(Use for monitoring)
OUT IN
LEFT AUDIO
RIGHT
VIDEO
ANT in | [Playing VCR] | |
(another source) | ||
|
TO MONITOR THE RECORDING
1Turn on the TV and set the TV to channel 3.
¡If noise appears, change the RF output channel of the VCR to channel 4 by pressing PLAY for 3 sec- onds during playback. Then select the same channel (CH4) on your TV. (See “RF OUTPUT CHANNEL” on page 13 for the detail).
2Press VCR/TV on the recording VCR.
MTS (Multi-Channel Television
Sound) SYSTEM
VCR
When you play a VHS tape, or receive a broadcast on | ||||||
the VCR’s tuner, the current sta- |
| 12:00AM |
|
|
| |
STOP |
|
|
|
| ||
tus will appear when you press |
| CH 32 |
| 1)* | ||
| STEREO |
| ||||
DISPLAY on the remote control. |
| SAP |
| |||
|
|
|
|
|
| |
When you record a MTS broad- |
|
|
|
|
|
|
cast signal, you need to set it to |
|
|
|
|
| 2)* |
SP | 0:00:00 HIFI |
|
| |||
MTS mode. |
|
|
|
|
|
|
|
|
|
|
|
|
|
1)* Press MENU and select "TV STEREO" or "SAP" by pressing K or L. Then, press B to select mode. To exit, press CLEAR/C.RESET.
¡Although a program may be broadcast in both stereo and sub audio, you must select the Recording mode to TV STEREO or SAP before you record a broad- cast.
1Insert a
2Insert a tape with a safety tab into the recording VCR.
3Press SPEED on the recording VCR to select the desired recording speed (SP/SLP).
4Select the “L1” or “L2”position on the recording VCR.
¡When you use the A/V input jacks on the back of the DVD/VCR, select "L1" position by pressing [0], [0], [1] on the remote control or the CHANNEL buttons (o/p).
¡When you use the A/V input jacks on the front of the DVD/VCR, select "L2" position by pressing [0], [0], [2] on the remote control or the CHANNEL buttons (o/p).
5Press REC/OTR on the recording VCR.
6Begin playback of the tape in the playing VCR.
¡For best results during dubbing, use the VCR’s front panel controls whenever possible. The remote con- trol might affect the playing VCR’s operation.
¡Always use
¡You can use a video disc player, satellite receiver, or other audio/video component with A/V outputs in place of the playing VCR.
– 21
2)* Press MENU and select "AUDIO OUT" by pressing K or L. Then, press B. Next, select "HIFI" or "MONO" by pressing K or L. To exit, press CLEAR/C.RESET.
¡While the VCR is set in HIFI stereo mode, HIFI appears on the TV screen. While the VCR is set in monaural (MONO) mode, HIFI disappears from the TV screen.
MTS RECORDING/MONITOR MODE
Type of | Display on the | STEREO/SAP | Normal audio | |||
broadcast | TV screen | Selection | track | |||
Regular |
| |||||
(monaural audio) | Mono | Mono | Mono | |||
|
| |||||
|
|
|
|
|
| |
Stereo | STEREO | L | R | L+R | ||
broadcast |
|
|
|
|
| |
Bilingual | SAP | TV STEREO* | Main audio | Main audio | Main audio | |
|
| program | program | program | ||
broadcast |
|
|
|
|
| |
| SAP* | Sub audio | Sub audio | Sub audio | ||
|
| |||||
|
|
| program | program | program | |
Stereo & | STEREO | TV STEREO* | L | R | L+R | |
Bilingual | SAP | SAP* | Sub audio | Sub audio | Sub audio | |
broadcast |
|
| program | program | program | |
*
– | EN |
1L25
