SWITCH HOUSING

ASSEMBLY

UPPER COVER

TRIM

TURN

TURN

 

HOLE FOR SPEED

CONTROL SWITCH

CHAIN

8-32 x1/2"

SCREW (2)

Figure 10 LOOKING UP INTO SWITCH HOUSING ASSEMBLY

16.Position the lower trim assembly on the upper cover trim so that the tabs on the lower trim assembly slide into the slots in the upper cover trim (Figure 11). Then securely install four 8-32 x 1/2” screws (supplied).

UPPER COVER TRIM

SLOT

8-32 x 1/2" SCREW (4)

LOWER TRIM ASSEMBLY

Figure 11

Electrical Requirements

Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.

The outlet box must be securely anchored and capable of withstanding a load of at least 50 pounds.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support”, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

How to Hang Your

Ceiling Fan

!WARNING

The fan must be hung with at least 7' of clearance from floor to blades (Figure 12).

CEILING

AT LEAST

7'

Figure 12

FLOOR

!WARNING

The outlet box must be securely anchored and capable of withstanding a load of at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable for Fan Support”.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support”, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

1.Securely attach the hanger bracket to the outlet box using the two screws supplied with the outlet box. (Figure 13).

!WARNING

Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, remove wall board until bracket contacts box. If bracket and/or outlet box are not securely attached, the fan could wobble or fall.

OUTLET

BOX

TWO SCREWS

 

SUPPLIED WITH

HANGER

OUTLET BOX

 

BRACKET

Figure 13

TAB

 

If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box at this time and remove the existing light fixture.

!WARNING

Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with national and local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.

2.Carefully lift the fan and seat the hanger ball/ downrod assembly on the hanger bracket that was just attached to the outlet box (Figure 14). Be sure the groove in the ball is lined up with tab on the hanger bracket (Figure 13).

!WARNING

Failure to seat tab in groove could cause damage to electrical wires and possible shock or fire hazard.

6

Page 5 Page 7
Page 6
Image 6
Emerson CF1ORB01 owner manual Electrical Requirements, How to Hang Your Ceiling Fan, Turn
Page 5 Page 7

CF1ORB01 specifications

The Emerson CF1ORB01 is a sophisticated ceiling fan designed to blend style with functionality, making it an excellent addition to any modern home. Its sleek design and advanced technologies ensure both aesthetic appeal and efficient performance.

One of the standout features of the Emerson CF1ORB01 is its Energy Star certification. This certification indicates that the fan operates with high energy efficiency, contributing to lower electricity bills while also promoting environmental sustainability. The motor is designed to provide quiet operation, ensuring that the fan can be used in bedrooms or living spaces without causing disruptive noise.

The CF1ORB01 is equipped with a robust 153 mm x 15 mm motor that provides outstanding airflow, making it suitable for various room sizes. The fan generates a maximum airflow of around 5,400 cubic feet per minute (CFM), ensuring a comfortable and breezy environment for users. An optional remote control feature is also available, allowing for easy operation from anywhere in the room, enhancing user convenience.

Another significant characteristic is the fan's versatile blade design. The Emerson CF1ORB01 features five blades constructed from high-quality materials, ensuring durability and longevity. The blades are meticulously balanced to minimize wobbling and noise, providing a serene atmosphere while circulating air effectively. The specific finish of the blades contributes to the overall aesthetic, allowing the fan to complement a range of interior design themes.

Installation of the fan is made easier with its universal ceiling mount design, which means it can be installed on various ceiling types, whether standard or sloped. Additionally, the fan comes with a downrod that allows it to hang at the optimal height for efficiency in airflow and style.

The Emerson CF1ORB01 also features a reversible motor. This allows users to switch the fan's direction, which is especially useful for seasonal changes. In summer, the fan can create a wind-chill effect, helping to keep spaces cool. In winter, reversing the fan's direction helps circulate warm air that rises to the ceiling, promoting an even temperature throughout the room.

Overall, the Emerson CF1ORB01 stands out for its combination of elegance, efficiency, and advanced features, making it a preferred choice for consumers seeking a reliable ceiling fan.
Top Page Image Contents