12
Setting The Time, The First Time
IMPORTANT:The first time you connect your new SmartSet ®CDclock radio to
theAC outlet the internalcomputer will autom atically set the time correctly for the
EasternTime Zone, which is the initial default setting. The display will scan for a
few seconds and then show the correctDay and Time in the Eastern zone. If you
livein the Eastern Time zone, there’s nothingelse to do. Your clock is set correctly
andrunning.
If you do not live in the Eastern Time zone you must change the default zone
displayto your own zone. Youonly do this one time and the SmartSet®willremember
the new default zone setting andwill always return to that setting after a power
interruption
There are 7 time zones programmed into your SmartSet®clock radio as follows:
ZONE 1 — Atlantic Time
ZONE 2 — Eastern Time (Default Setting)
ZONE 3 — Central Time
ZONE 4 — Mountain Time
ZONE 5 — Pacific Time
ZONE 6 — Yukon Time
ZONE 7 — Hawaiian Time
Tochange the default time zone display, depress the TIME ZONE button. The
number “02” will appearon the display indicating that the default zone is ZONE 2,
EasternTime.
Hold the TIME ZONEb utton andthen pres seith er the or buttonsuntil your
own time zone appearson the display, then release the buttons.
The clock display will change to the correct time in the time zone you selected. The
clock will always return tothe cor recttime in the zone you selected after every
powerinterruption. If you move to a different time zone, simply change the default
zonedis play to the new zone and the SmartSet®will remember that setting foryou.
CKD5809_021705.p65 17/2/2005, 14:5812