Programmed Playback
Programmed playback allows you to program the player to play up to 20 tracks on a disc in any desired order. You may also program the same track to play multiple times within the same program if desired.
Note: You cannot program the player while the disc is playing. If the disc is playing press the 
STOP button first and then perform the following steps.
1.) Press the PROGRAM button. The Program “PROG” indicator and Track number “0” begin flashing in the display.
2.) Press the 
or 
buttons to select the first track to be programmed.
Example: Track 7
3.) When track number 7 is flashing in the display press the PROGRAM button again to enter track number 7 in program memory number 1.
The track number display returns to “0”.
4.) Press the 
or 
buttons to select the next track number to be programmed, and when the desired track number is flashing on the display press the PROGRAM button to enter that track in the program memory.
5.) Repeat step 4 until you have entered up to 20 tracks in the program memory.
6.) Press the 
PLAY/PAUSE button to begin programmed playback.
The PLAY indicator appears and the Program “PROG” indicator continues to flash. The tracks you programmed will be played in the desired order.
2 4
