Emerson CKD5811 owner manual Installing The Sure-Alarm Back-up Battery Not Included

Installing The Sure-Alarm Back-up Battery (Not Included)

The Sure-Alarm battery compartment is located on the back panel.

1.) Press down on the battery door locking tab as shown and remove the battery door.

2.) Gently pull the battery terminal outside of the compartment just far enough so you can connect the battery.

3.) Connect a fresh, well-known brand of

9-Volt Alkaline battery to the battery terminal. It can only be connected one way.

4.) Push the battery back into the battery compartment and replace the battery door.

6

CKD5811_080306.p65 6

3/8/2006, 11:01