Programmed Playback
The CD player in this unit has a 20 track programmable memory which allows you to program any disc to play just the tracks you want to hear in the exact order that you want to hear them. You may program a track or tracks to play more than once if desired.
Note: Programming can only be done while the player is in the Stop mode. If a disc is playing press the 
Stop button to stop playback before performing the programming steps below.
1.) Turn the unit ‘On’, select the CD function and load the desired disc in the player. Wait until the player reads the disc and the display shows the total track number.
2.) Press the PROGRAM button. The PROGRAM indicator flashes and the display briefly shows “P 01” then “00” flashes indicating that you can select the first track to be programmed.
PM | PM |
ALARM 1 | ALARM 1 |
| ALARM 2 |
3.) Press the | or | buttons to select the first | PM |
track. The desired track number flashes on the | ALARM 1 | ||
display. |
|
|
|
ALARM 2
ALARM 2
4.) Press the PROGRAM button again. The selected track is entered in program memory number 01 and the display advances to “P 02”then “00”flashes again indicating that you can select the next track to be programmed.
PM | PM |
ALARM 1 | ALARM 1 |
ALARM 2 |
|
|
| ALARM 2 |
5.) Press the 
or 
buttons to select the next track to be programmed, and press the PROGRAM button to enter the track in the memory.
6.) Repeat step 5 to program up to 20 tracks in the memory.
17
CKD9906_071905.p65 | 17 |
19/7/2005, 14:26
