IM PORTANT NOTES

•Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas, places subject to constant vibration and/or humid or moist areas.

•Operate controls and switches as described in the manual.

•Before turning on the power, make certain that the power cord is properly installed.

•When moving the set, be sure to first disconnect the AC power cord.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

3

CKS1850-1851_072706.p653

27/7/2006, 16:13

Page 3 Page 5
Page 4
Image 4
Emerson CKS1851, CKS1850 owner manual IM Portant Notes, FCC Information
Page 3 Page 5

CKS1851, CKS1850 specifications

The Emerson CKS1850 and CKS1851 are highly regarded analyzers designed to offer exceptional performance and precision in various industrial applications. These sophisticated devices are primarily known for their robust construction, advanced features, and user-friendly interface, making them ideal for demanding operational environments.

One of the standout features of the Emerson CKS1850 and CKS1851 is their capability to perform real-time gas analysis. Equipped with advanced infrared spectroscopy technology, these analyzers can measure a wide range of gases, including carbon dioxide, methane, and oxygen. This provides users with crucial insights into combustion efficiency and emissions control, supporting compliance with environmental regulations.

The Emerson CKS1850 and CKS1851 also boast dual-channel analysis, enabling simultaneous measurement of two different gases. This is particularly beneficial in applications requiring precise monitoring across multiple parameters, enhancing workflow efficiency and reducing the need for multiple devices. The analyzers can easily switch between gas types and measurement modes, offering versatility in various operational contexts.

Connectivity options are another highlight of the Emerson CKS1850 and CKS1851. Both models come equipped with multiple communication protocols, including Modbus and Ethernet, allowing seamless integration into existing control systems. This connectivity facilitates remote monitoring and control, ensuring that operators have up-to-date information at their fingertips.

The user interface of the CKS1850 and CKS1851 is designed for simplicity and ease of use. A high-resolution touchscreen display provides clear readings and data visualization, making it straightforward for operators to navigate through different settings and parameters. Furthermore, the intuitive menu design enhances user experience by reducing training time for new personnel.

Both models are built with durability in mind. The robust housing provides protection against harsh industrial environments, ensuring that the analyzers maintain their performance over time. Additionally, the low-maintenance design minimizes downtime, making them a cost-effective solution for continuous operation.

In summary, the Emerson CKS1850 and CKS1851 analyzers combine advanced gas analysis technologies with user-friendly features and exceptional durability. Their real-time measurement capabilities, dual-channel analysis, extensive connectivity options, and intuitive user interfaces make them indispensable tools in various industries, including petrochemical, energy, and environmental monitoring.
Top Page Image Contents