Adjusting The Wake Up Times

Your SmartSet® clock radio has two separate alarms that can be set and used independently. You may use the alarms to wake two people at different times, or you may use one alarm for weekdays and the other for weekend wake up times. The procedure for adjusting the wake up time is the same for both Alarm 1 and Alarm 2.

1.) Depress and hold either the ALARM 1 or ALARM 2 setting button. The display will change from the correct time to the Alarm 1 or Alarm 2 wake up time.

2.) While holding the ALARM 1 or ALARM 2 setting button, depress either the SET (Up) or SET (Down) button to move the display ahead or back to your desired wake up time.

3.) W hen the desired wake up time appears on the display, release the SET (Up) or SET (Down) buttons.

Note: Be sure that you have set the wake up time correctly by observing the AM indicator. If the AM indicator is ‘On’the wake up time is “AM”. If the AM indicator is ‘Off’, the wake up time is “PM”.

4.) When the desired wake up time (AM or PM) appears on the display, release the ALARM 1 or ALARM 2 setting buttons.

11

CKS1862_110606.p65

11

6/11/2006, 9:47

Page 12
Image 12
Emerson CKS1862 owner manual Adjusting The Wake Up Times