IM PORTANT NOTES

•Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas, places subject to constant vibration and/or humid or moist areas.

•Operate controls and switches as described in the manual.

•Before turning on the power, make certain that the power cord is properly installed.

•When moving the set, be sure to first disconnect the AC power cord.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

3

CKS3015_010406.p65

3

4/1/2006, 16:34

Page 3 Page 5
Page 4
Image 4
Emerson CKS3015 owner manual IM Portant Notes, FCC Information
Page 3 Page 5

CKS3015 specifications

The Emerson CKS3015 is a highly regarded temperature control and monitoring device designed for precise applications in various industrial settings. This unit is recognized for its robust construction, advanced technology, and user-friendly features that enhance operational efficiency.

At the heart of the CKS3015 is its state-of-the-art PID (Proportional-Integral-Derivative) algorithm, which ensures accurate temperature control by continuously measuring the temperature of the process and adjusting the output according to the difference between the desired setpoint and the actual temperature. This feature not only enhances stability but also minimizes overshoot and undershoot, making it ideal for critical temperature-sensitive operations.

The CKS3015 boasts a wide temperature range, making it versatile for various applications, from food processing to pharmaceuticals. It can operate in extreme environmental conditions, which contributes to its reliability and longevity in industrial applications. The device supports multiple thermocouple types, RTD, and analog inputs, allowing for flexibility in measurement and compatibility with different sensors.

User-friendly design is another significant characteristic of the Emerson CKS3015. It features a large, bright LCD display that provides clear visibility of temperature readings and system status. Additionally, intuitive navigation through the menu allows users to easily access and modify settings, calibrate the system, and review historical data logs.

Connectivity is a key aspect of the CKS3015, as it comes equipped with various communication interfaces, including RS-232 and Ethernet options. This allows for seamless integration into existing control systems and enhanced data management capabilities. Operators can monitor multiple devices remotely, enabling greater oversight and quicker response times to any anomalies in the process.

Moreover, the Emerson CKS3015 is designed with safety and compliance in mind. It includes features such as alarm outputs, fail-safe settings, and enhanced protection against over-temperature situations. These built-in safety mechanisms ensure the integrity of the process and help prevent equipment damage while adhering to industry regulations.

In conclusion, the Emerson CKS3015 is an exceptional choice for industries requiring precise temperature control and monitoring. Its advanced PID control, versatility in temperature range, user-friendly interface, robust connectivity options, and reliable safety features make it a top contender in the field of industrial temperature controllers. Whether for food processing, pharmaceuticals, or other critical applications, the CKS3015 delivers performance and reliability that professionals can depend on.
Top Page Image Contents