Emerson EC1320C owner manual Zero Return, Time Search, TO CANCEL THE TIME SEARCH at this point

SEARCH

Make sure ...

•TV/VCR power must be turned on.

•Insert a tape.

ZERO RETURN

This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding.

NOTE:

Zero Return WILL NOT work on a blank tape or a blank portion of a tape.

1Stop a tape at your desired point

Rewind or fast forward the tape to the beginning point at which you want to review.

2Reset the counter to 0:00:00

Press the COUNTER RESET button repeatedly.

3Begin recording or playback

Press the RECORD or PLAY button.

Press the STOP button when recording or playback is completed.

4To activate “ZERO RETURN” mode

Press the MENU button on the	– M E N U –
remote control.	PICTURE CONTROL
	TIMER PROGRAMMING
Press the PLAY/K or STOP/L but-	SETTING CLOCK
	USER’S SET UP
	CHANNEL SET UP
ton to point to “ZERO RETURN”.	V-CHIP SET UP
	LANGUAGE [ENGLISH]
	CAPTION [OFF]
Then, press the F.FWD/B button.	B ZERO RETURN
	TIME SEARCH

The counter will appear on the TV screen.

The tape will automatically stop when the counter returns to 0:00:00.

TIME SEARCH

The Time Search function makes it possible to quick- ly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip.

NOTES:

•Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.

•This function will not operate in recording mode.

•This function is not operative when a cassette tape is not inserted in the TV/VCR.

In the example below: To watch a program after 2 hour 50 minutes from the present position, in either direction.

1Insert a tape.

2Select “TIME SEARCH” mode

Press the TIME SEARCH button (with each push it will increase by 10 minute).

OR

Press the MENU button on the	– M E N U –
	TIMER PROGRAMMING
remote control.	PICTURE CONTROL
	CHANNEL SET UP
	SETTING CLOCK
Press the PLAY/K or STOP/L but-	USER’S SET UP
	LANGUAGE [ENGLISH]
	V-CHIP SET UP
ton to point to “TIME SEARCH”.	CAPTION [OFF]
	B TIME SEARCH
	ZERO RETURN
Then, press the F.FWD/B button.
3 Enter your desired time
Press the PLAY/K or STOP/L but-	TIME SEARCH

ton until your desired time appears.	2 : 50
(Example: “2:50” stands for 2 hours
50 minutes)

If you wish to cancel the Time

Search at this point, press the MENU button on the remote control.

4Begin Time Search

By pressing the REW/s or F.FWD/B button, the TV/VCR will rewind or fast forward to the specified point.

The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically.

TO CANCEL THE TIME SEARCH at this point

Press the STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time.

- 23 - EN

9I03