Emerson EC1320C Maintenance, To Cancel The Wake Up Timer, To Cancel The Sleep Timer

3Set wake up time

Press the PLAY/K or STOP/L but- ton until to point to “TIME”. Press the F.FWD/B or REW/s button until your desired wake up time appears.

WAKE UP	ON/OFF	[ON]
TIMER	TV/TAPE	[TV]
	B TIME	[12:00AM]

1Select “SLEEP TIMER”

Press the WAKE UP/SLEEP button on the remote control until “SLEEP TIMER” appears.

2 Set sleep time

Press the PLAY/K, STOP/L,

Each additional push will increase (or decrease) the time by 10 minutes.

4Exit the Wake Up Timer setting

Press the MENU button on the remote control to return to TV mode.

TO CANCEL THE WAKE UP TIMER

Press the WAKE-UP/SLEEP button on the remote control once, and confirm “ON/OFF” is pointed. Press the F.FWD/B or REW/s button until [OFF] appears..

SLEEP TIMER

The Sleep Timer function turns off the TV/VCR without using the POWER button after a desired period of time.

NOTE:

•This function does not operate during Recording mode.

F.FWD/B or REW/s button until
your desired sleep time appears.
Each additional push will increase	SLEEP TIMER [2:00]
the time by 30 minutes up to 120
minutes.

Press the MENU button on the remote control to exit the Sleep Timer setting.

TO CANCEL THE SLEEP TIMER

Press the WAKE-UP/SLEEP button on the remote control until “SLEEP TIMER” appears.

To view the time left for sleep timer, press the WAKE-UP/SLEEP button twice, then press the MENU button on the remote control to exit the sleep timer setting.

MAINTENANCE

CABINET CLEANING

•Wipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in luke- warm water and wrung dry.

•Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/VCR. Such chemicals may cause damage and discoloration to the exposed surfaces.

AUTO HEAD CLEANING

•Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

•Playback picture may become blurred of interrupt- ed while the TV program reception is clear. Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem.

If a streaky or snowy picture appears during play- back, the video heads in your TV/VCR may need to be cleaned.

1.Please visit your local Audio/Video store and pur- chase a good quality VHS Video Head Cleaner.

2.If a Video Head Cleaner does not solve the prob- lem, please call our help line at 1-800-287-4871, to locate an Authorized Service Center.

NOTES:

•Remember to read the instructions included with the video head cleaner before use.

•Clean video heads only when problems occur.

SERVICING

•Should your TV/VCR become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power cord, and please call our help line at 1-800- 287-4871, to locate an Authorized Service Center.

- 29 - EN

9I03