Emerson ES11 Operating Instructions, Electronic Volume Control, Preset Electronic Equalizer Eq

OPERATING INSTRUCTIONS

•Make sure that the FM Lead Wire Antenna is fully extended.

•Make sure that you have installed batteries in the remote control.

•Make sure that the AC power cord is connected to an outlet that is always “live”. Do not connect to an outlet that is controlled by a wall switch.

ELECTRONIC VOLUME CONTROL

To increase or decrease the volume level press the VOLUME "+" or "–" buttons on the front panel or on the remote control.

PRESET ELECTRONIC EQUALIZER (EQ)

This system has a 3-Band Preset Electronic Equalizer that allows you to adjust the tone output for the most popular types of music. The settings are “CLASSIC” (Flat), “JAZZ”, and “ROCK” (Pop). The CLASSIC setting has the least amount of equalization. Use this setting for classical music or when you want to listen to a CD as the producer intended. The JAZZ setting places more emphasis on the mid to high frequencies. The ROCK (Pop) setting places more emphasis on the lower frequencies.

These settings are just suggestions. The final choice is up to you. For example you may decide that you like to listen to all your music with the EQ set to the ROCK (Pop) setting.

To change the EQ setting press the PRESET EQ button on the front panel or on the remote control until the desired setting appears in the main display.

9

ES11_ib022503.p65 9

25/2/2003, 16:05