Playing Compact Discs

IMPORTANT:

This system can play normal CDs, and most Recordable CDs (CD-R), and Rewriteable CDs (CD-RW). However the playability of CD-R and CD-RW discs is dependent on the type of software used for ‘ripping’and ‘burning’the discs, and the quality of the blank discs used for recording. 100% playback compatibility cannot be guaranteed. This is not an indication of any problem with this system.

1.) Press the ON/OFF button on the main unit or remote to turn the system ‘On’.

2.) Press the CD button on the main unit or remote to select the CD function.

3.) Press on the CD door in the area marked “OPEN/ CLOSE” to open the door. If you have not already done so remove the transit protection card from the CD player and discard it.

4.) Place your CD on the spindle with the printed label side facing up. Press down on the disc near the center hole to make sure that the disc is properly ‘seated’ on the spindle, then close the CD door and make sure that it locks securely.

5.) When the door is closed the CD player will read the Table of Contents on the disc and after a few seconds the display will show the total playing time and number of tracks on the disc.

NOTE: If the disc is inserted upside down, or the disc is damaged, the player will not be able to read it. In this case the word "disc" will flash in the display. Insert the disc properly or try another disc.

6.) Press the PLAY/PAUSE button to begin playback on track 1. The display will show the elapsed time of each track as playback continues.