LISTENING TO THE RADIO
1.) Press the POWER/STANDBY button on the top panel or on the remote control to turn the system ‘On’. The STANDBY indicator goes ‘Off’and the main display comes ‘On’.
2.) Press the TUNER/BAND button on the top panel or remote control to select the Tuner function, and press again to switch between AM and FM bands. The display will show an AM or FM frequency.
FM
MHz
3.) Press the TUNING (SET) or buttons on the top panel or on the remote control to tune to the desired station.
•Manual Tuning – repeatedly press the TUNING (SET) or buttons until the display shows the frequency of the desired station.
Note: Use this method to tune in weaker stations.
•Automatic Tuning
4.) Press the VOLUME or buttons on the top panel or on the remote control to adjust the volume.
5.) Adjust the Equalizer and BASS BOOST controls as desired.
6.) When you are finished listening press the POWER/STANDBY button on the front panel or on the remote control to turn the system ‘Off’. The main display goes ‘Off’and the STANDBY indicator comes ‘On’again.
11
ES13_draft090902.p65 | 11 |
9/9/2002, 17:37