Listening To The Radio
1.Press the TUNER (BAND) button to select the Tuner function. The display will show either an AM (kHz) or FM (MHz) radio frequency.
2.Press the TUNER (BAND) button again to switch between AM and FM bands if necessary.
3.Tune to the desired station with the Bor Fbuttons as follows:
•Automatic Tuning - Press the Bor Fbutton for 2 seconds, then release. The Tuner will search up or down the band for the first strong station and then stop. Continue this operation until the Tuner stops on your desired station.
•Manual Tuning - Repeatedly press the Bor Fbuttons until the frequency of your desired station appears in the display
4.Adjust the VOLUME and EQUALIZER controls as desired.
Note: If reception is unsatisfactory it may be necessary to reposition the external AM and FM antennas to find the position that provides the best reception.
Storing Stations In Memory
You can store up to 40 (20 AM/20 FM) of your favorite stations in the tuner memory for easy recall.
1.Tune to the first station you wish to memorize. Refer to step 3 above if necessary
2.Press the MEMORY (PROG) button. The MEMORY indicator and "CH 00" flash in the display. Immediately press either the CHANNEL UP (REPEAT) or CHANNEL DOWN (RANDOM) buttons to select the desired memory number.
21
ES2_ib041503.p65 | 21 |
15/4/2003, 9:36
