4.Immediately press the B or F buttons to set the display to the desired wake up hour. Example: 6:00 AM (Observe the AM/PM indicators to be sure you are setting the hour correctly.)
TUNER
ALARM
5.Immediately press the MEMORY (PROG)/CLOCK ADJ button. The Minute digits begin to flash. Press the Bor Fbuttons to adjust the display to the correct minute, Example: 6:30 AM, and then press the MEMORY (PROG)/CLOCK ADJ button again.
TUNER
ALARM
6.Repeatedly press the ALARM button to cycle through the alarm modes as follows:
•First Press: ALARM BUZZER
•Second Press: ALARM CD
•Third Press: ALARM TUNER
•Fourth Press: ALARM ‘Off’ (ALARM indicator disappears)
When the desired alarm mode is flashing stop pressing the ALARM button. The Alarm indicator remains 'On' and the selected mode indicator continues to flash. This is your indication that the alarm is set. It will turn on every day at the time you programmed.
7.To cancel alarm operation press the ALARM button until the ALARM indicator disappears and none of the Alarm mode indicators are flashing.
8.To stop the alarm immediately after it turns on in the morning press the STANDBY (POWER) button. The alarm stops immediately and resets itself for the following day.
25
ES2_ib041503.p65 | 25 |
15/4/2003, 9:36