Emerson ES299 owner manual Turn the system On as usual

Playing MP3 Audio Files Stored On SD/MMC Memory Cards

Note: The card reader in this system can only read files in MP3 format. It cannot read files in other compressed audio formats such as WMA, AAC, etc.

1.) Turn the system 'On' as usual.

2.) Press the FUNCTION button repeatedly until the main display shows "CARD – USB".

3.) Insert your “SD” or “MMC” flash memory card containing MP3 audio files into the SD/MMC card slot as shown in the illustration.

Note: The card can only be inserted one way. Push it in as far as it will go until it locks in place.

4.) The player will read the information on the

card and the display will show the total number of files “Tracks” and “Albums” on the card.

The reader LED indicator will light up.

5.) Press the PLAY/PAUSE button to begin playback.

•Adjust the VOLUME, EQ, and DBBS controls as desired.

•You can skip tracks with the SKIP TUNING "+" or "–" buttons just as you would with a normal CD.

•You can skip Albums with the ALBUM/MEM.CH "+" or "–" buttons.

• You may press the MODE button once to enter “Album Search” mode, then press the SKIP TUNING "+" or "–" buttons to search the desired album.

Note: If the album name is not recognized, or if the album was not properly named, the display will show “UNKNOWN”.

6.) Playback will continue until the last track has played and then the display will again show the total number of tracks, albums on the card.

Note: If you have finished listening and want to remove your memory card before the music ends, always press the STOP button first and then remove your card. If you remove the card before pressing the STOP button you may cause an electro-static discharge (ESD) condition and this may prevent the card reader from operating properly until the ESD condition is cleared.

37

ES299_062905.p65 37

29/6/2005, 15:07