FLAT PANEL SPEAKER CONNECTION
IMPORTANT: CONNECT THE SPEAKER PANEL TO THE MAIN UNIT BEFORE YOU CONNECT THE AC POWER CORD TO THE AC OUTLET.
The Thinovation™ Speaker Panel not only contains the left and right wide range speakers, it also serves as the CD compartment cover. To install the Thinovation™ Speaker Panel on the main unit simply slide the Thinovation™ Speaker Panel down ward on the speaker mounting bracket as shown so that the two plugs on the top of the mounting bracket fit into the two jacks on the bottom of the speaker panel. You may tilt the mounting bracket forward to make this operation easier if necessary.
After the panel is mounted on the bracket you should lock the panel in place by sliding the two locking switches on the back of the panel ‘inward’so they fit into the corresponding ‘notches’on the sides of the mounting bracket.
RELEASE LOCK
LOCK RELEASE
IMPORTANT: Remember to unlock these two switches before you try to remove the speaker panel from the mounting bracket.
5
ES88_ib072503.p65 | 5 |
25/7/2003, 10:09