Emerson EWC1303A owner manual Hints for Automatic Timer Recording, Auto Return, Wake UP Timer

TO CANCEL AN AUTOMATIC TIMER RECORDING

•After setting a program; 1)Press the POWER button.

2)Repeat steps [1] - [2] on page 21 and select a program you want to cancel.

3)Press the T-PROG. CLEAR button.

4)Press the MENU button on the remote control to return to TV mode.

•While recording is in progress; 1)Press POWER button.

2)Press the STOP/EJECT button on the TV/VCR.

2 Set “AUTO RETURN” to [ON]	– USER’S SET UP –
Press the PLAY/K or STOP/L but-	RENTAL	[OFF]
ton to point to “AUTO RETURN”.	REPEAT PLAY	[OFF]
	B AUTO RETURN	[ON]

Press the F.FWD/B or REW/s button until [ON] appears.

3Auto Return will begin

When all the timer recordings are completed, the TV/VCR will rewind to the beginning of the recorded program(s).

NOTE:

•If you press the POWER button while tape is rewinding, the Auto Return will stop.

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the RECORD indicator goes off.

2)Press the MENU button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the F.FWD/B button. The details of pro-

grams appear on the TV screen.

5)Press the MENU button on the remote control to return to TV mode.

HINTS FOR AUTOMATIC

TIMER RECORDING

4Watch the recorded program

Press the PLAY button.

TO CANCEL THE AUTO RETURN MODE

Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button.

If there is a power failure of any kind, the unit will retain its memory for this feature.

•Make sure the channel you want to record is prop- erly set in advance.

•It is not necessary to press the RECORD button for timer recording.

•Recording begins automatically at the Start time.

•If you are recording using a Timer mode, you may not operate the unit manually.

•The erase-prevention tab on the cassette must be in place (or you must put tape over the hole).

•If the erase-prevention tab is removed, the cassette will be ejected when the POWER button is pressed to off.

•If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediate- ly, and the tape will be ejected.

AUTO RETURN

With this feature, after timer recording is finished, the beginning of the recorded program(s) can be searched for automatically.

1 Select “USER’S SET UP” – M E N U –

WAKE UP TIMER

The Wake Up Timer function turns on the TV/VCR without using the POWER button after a desired period of time.

NOTES:

•Use the remote control for this procedure.

•Clock must be set to the correct time before setting the timer.

•If you want to select [TAPE], you must insert a cassette tape in the TV/VCR. The tape will start playback automatically on your desired time.

1Select “WAKE-UP TIMER”

Press the WAKE UP/SLEEP button on the remote control once, and confirm “ON/OFF” is pointed.

Press the F.FWD/B or REW/s	WAKE UP B ON/OFF	[ON]
	TIMER TV/TAPE	[TV]
button until [ON] appears.	TIME	[12:00AM]

2Select “TV” or “TAPE”

Press the PLAY/K or STOP/L but- ton until to point to “TV/TAPE”.

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “USER’S SET UP”. Then, press the F.FWD/B button.

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP

BUSER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

Press the F.FWD/B or REW/s button, and select [TV] or [TAPE].

- 23 -

WAKE UP	ON/OFF	[ON]
TIMER	B TV/TAPE	[TV]
	TIME	[12:00AM]

EN

9I03