Emerson EWC1901 Auto Repeat Playback, Normal Playback, Inserting A Cassette, Precautions

PLAYBACK

This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not us poor quality or damaged tapes.

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.

Window

CORRECTWRONG

AUTO REPEAT PLAYBACK

The TV/VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button.

ALL REPEAT: Repeat playback from the beginning to the end of the tape.

BLANK REPEAT: Repeat playback from the begin- ning to a blank part, which is blank for more than 10 seconds.

PRECAUTIONS

• Avoid moisture. Moisture condensation may occur

on the tape if it is moved from a cold place to a

warm place or visa versa. Before using a tape with

these conditions, to avoid damage of the tape and

your TV/VCR, wait until the tape has warmed to

room temperature and the moisture has evaporated.

• Avoid extreme heat, high humidity and magnetic

1Select “USER’S SET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “USER’S SET UP”. Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP

BUSER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

fields.

• Do not tamper with the cassette mechanism.

• Do not touch the tape with your fingers.

NORMAL PLAYBACK

Make sure ...

•TV/VCR power must be turned on.

1Insert a prerecorded tape

If the erase-protection tab has been removed, the TV/VCR will start playback automatically.

2 To begin playback PLAY B

Press the PLAY button.

Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU but-

ton to clear the menu. then, press the PLAY button. If a tape is already on the TV/VCR with power off,

A)Press the PLAY button on the TV/VCR. Power will automatically turn on and playback will start. (Direct button operation)

B)Use the remote control;

Press the POWER button to turn the TV/VCR on, and then press the PLAY button on the remote con- trol.

3 To stop playback STOP

Press the STOP button when play- back is completed.

2 Select “ALL” or “BLANK”
Press the PLAY/K or STOP/L but-	– USER’S SET UP –
ton to point to “REPEAT PLAY”.	RENTAL	[OFF]
Press the F.FWD/B or REW/s
	AUTO RETURN	[OFF]
	B REPEAT PLAY	[ALL]

button repeatedly until your desired selection [ALL] or [BLANK] appears.

3Exit the Repeat Play setting

Press the MENU button on the remote control to return to the TV mode.

4Start playback

Press the PLAY button to start the Repeat Play. ”REPEAT PLAY B” appears.

•Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/VCR.

•If the Rental mode is set [ON], the “RENTAL PLAY B” display has priority.

TO CANCEL THE REPEAT PLAY MODE

Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode.

If there is a power failure of any kind, the unit will retain its memory for this feature.

- 17 - EN

9I03