SPECIAL FEATURES
AUTO REWIND
When a tape has reached the end during recording, play- back, or
COUNTER MEMORY FUNCTION
Use this feature to memorize the beginning of recording start point.
to the beginning. After rewinding finishes, the VCR will eject the tape and turn itself to off.
●The tape will not
●When the Counter Memory is activated, the tape will rewind to the M0:00:00 and the VCR will go into the Stop mode.
1)Press the COUNTER RE- SET button on the remote control to reset the counter.
2)Press the COUNTER MEMORY button on the remote control so that "M" appears on the TV screen.
3)Record the program.
REC
SP | M 0:00:00 |
REAL TIME TAPE COUNTER
●This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change during blank portions on the tape.)
●The
4)After recording, press the STOP button then the REW button.
●When "0:00:00" is reached, rewinding operation goes to stop. And you can view the recording pro- gram.
●The COUNTER MEMORY button does not function if the auto repeat mode is set to [ON]. In this case, set the auto repeat mode to [OFF].
●To cancel the counter memory mode, press the COUNTER MEMORY button so that "M" disap- pears from the TV screen.
TROUBLESHOOTING GUIDE
If you have followed the instructions contained in this manual and have difficulty in operating your VCR, locate the PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem.
PROBLEM | CORRECTIVE ACTION |
No power. | ● Make sure the power plug is connected to an AC outlet. |
| ● Make sure the power is turned on. |
Timer recording is not possible. | ● Make sure the timer recording is set correctly. |
| ● Make sure the power is off. |
| ● Make sure the VCR clock is set correctly. |
Cannot go into Record mode. | ● Make sure the tape has a safety tab. If needed, cover the hole with |
| plastic tape. |
Playback picture is partially noisy. | ● Adjust tracking control for a better picture by pressing the |
| CHANNEL Up or Down button on the VCR. |
Cannot view a tape but the audio is | ● Head cleaning may be necessary. Refer to "AUTO HEAD |
OK. | CLEANING" . |
| ● Make sure the VCR is not in the Menu mode. |
No picture or poor picture on | ● Set your TV to the VCR mode and/or press the VCR/TV button so that |
playback. | the VCR/TV indicator on the VCR comes on. |
| ● Fine tune your TV. |
● | |
seen. | ● Set your TV to the TV mode and/or press the VCR/TV button so that |
| the VCR/TV indicator on the VCR disappears. |
No VCR operation from the infrared | ● Make sure the power plug is connected to an AC outlet. |
Remote Control. | ● Check batteries in remote control. |
Video or color fades in and out when | ● You cannot copy a copyrighted video tape. You are experiencing |
making a copy of a video tape. | copy guard protection. |
- 12 - | EN |
| 0J01 |
H7836
