Cleaning instructions: |
Below is a listing of general cleaning tips that should be noted when cleaning your wine cooler.
When cleaning your cooler, be cautious when using any type of cleaning products, some individuals may have allergic reactions to the chemicals in some of these products. By using solvents to clean your cooler, you may damage its finish, hence it is recommended to use mild detergents, baking soda and water. Never spray or squirt any type of liquid onto your cooler. If a spray is needed, spray the liquid onto a cloth and then use the moistened cloth to rub down the cooler.
•Always unplug the wine cooler before cleaning.
•Wash the inside surface with a warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart (1 liter) of water.
•Wash the racks with a mild detergent solution.
•The outside of the wine cooler should be cleaned with a mild detergent solution.
•Always dry all the parts with a clean dry cloth before plugging the wine cooler back into the receptacle.
AVOID ABRASIVE PRODUCTS SUCH AS SCOURING PADS AND POWDERS. THEY WILL
PERMANATELY DAMAGE THE FINISH OF YOUR WINE COOLER
In addition to the cleaning tips listed above it is recommended to clean the external fan filter of your wine cooler every 6 months as dirt, dust and hair can build up causing the cooling system do not function as efficiently.
ALWAYS UNPLUG THE UNIT FROM THE WALL PRIOR TO CLEANING THE FAN FILTER
There are 2 effective methods to clean the external fan filter of your wine cooler:
•A vacuum cleaner can be used collect the dirt, dust and hair that has built up
•Alternatively compressed air in a container can be used to clean the fan filter of your wine cooler. Ensure to follow the directions of the compressed air container to avoid damage or personal injury.
Interior Light Information:
The interior light source of the wine cooler consist of LED lighting which is long lasting and very energy efficient. LED lights will usually last for many years, even sometimes lasting longer than the product they have been installed in. If for any reason the LED lights stop burning and you have determined that they do not longer work. Please contact our customer service department
