Instruction Manual
HAS60E-IM-HW
June 2007 NGA 2000 CLD
3 - 9OperationEmerson Process Management GmbH & Co.OHG
Figure 3-14: Signals Menu
Signal value for 0% (100%) output:
It is possible to set the signal value for 0 % output and for
100% output so as to output only a portion of the entire
range.
Example:
Range from 0 to 1,000 ppm
0% value to be 400 ppm,
100% value to be 700 ppm.
Analog output normally:
0 V = 0 ppm, 10 V = 1,000 ppm
After changing the output scaling:
0 V = 400 ppm, 10 V = 700 ppm.
Move the cursor to the "Signal value for 0 % output:" line
and adjust the value to 400. Then change to the "Signal
value for 100 % output:" line and adjust the value to 700.
NOTE
If the measurement range is changed, the settings
done in this menu will revert back to the standard
values of the range. The output values can be
changed permanently in the menu "Range Set-
tings."
NOTE
The signal range of the analog output should be
less than the smallest range of the channel. Oth-
erwise the analog output may exhibit excessive
noise.
Output current:
Select the desired output range in the "Output current
range:" line. The options are 0...20 mA or 4...20 mA.
Hold output during calibration:
Enable this option to hold the analog output to the last
value during calibration.
Pressing the F5 (More...) softkey changes the to the
submenus "Output Signal if Assigned Module Fails" and
"Fine Adjustment."
Figure 3-15: Output Signal If Assigned Module
Fails Menu
Line#1
Measure >>>
0.000 ppm
<<< Back...
-- Signals --
t90 time:
Output delay time:
Calibration status
Linearizer:
Measurement mode:
Operational state:
Health:
Interference:
>>>
Line#1
Measure >>>
0.000 ppm
<<< Back...
-- Signals --
Sample flow:
Sample press.:
Ozonator:
Converter temp.:
Block temp.:
Detector temp.:
NO/NOx:
Noise level:
Line#1
Measure More...
0.000 ppm
Back...
-- Output Signal If Assigned Module Fails --
Output(s) value on analyzer failure:
-- Fine Adjustment --
Output number:
Operation mode:
Fine adjustment for 0% output:
Fine adjustment for 100% output:
BeginOfRange - 10%
1
Normal
4096
819