Emerson HD2700 Electronic ANTI-SKIP Protection, Connection to AN External Audio System

ELECTRONIC ANTI-SKIP PROTECTION

This CD player is equipped with an automatic 45 second Electronic Anti-Skip Memory and an Anti-Rolling Mechanism that will eliminate virtually all skipping under normal conditions. When you press the PLAY/PAUSE button to begin playback the player immediately begins to store 45 seconds of music in a solid state memory that is impervious to shock. The player is always reading the disc 45 seconds ahead of the music you are hearing and storing that information in the memory. If the player is subjected to shock or bumps of less than 45 seconds duration you will not notice them at all. If the bumps last longer than 45 seconds the anti-skip memory may be depleted and the player may skip or stop.

When playback begins the Anti-Skip indicator comes on and a series of "bars"

appear in the display. When all 5 "bars" appear the Anti-Skip memory

contains 45 seconds of music and is "full". If the player is bumped or shaken the

"bars" may start to disappear as the memory is depleted. If all 5 "bars"

disappear

the memory is empty and the player may skip if the bumps continue.

When the bumps stop the memory starts to fill up again and all 5 "bars" will

reappear.

CONNECTION TO AN EXTERNAL AUDIO SYSTEM

You can connect this CD player to a home stereo system, receiver, amplifier, or recorder if desired. Connect the LINE OUT jack of this CD player to the Left/Right Auxiliary Inputs, Line Inputs, or Record Inputs of the external device. The connection cable is NOT included. Set the DBBS(Bass Boost) switch of this CD player to the ‘OFF’ position. Be sure to follow the external source connection instructions for the other equipment as well.

LEFT (WHITE)

CONNECTING CORD (Optional)

RIGHT (RED)

11

HD2700_ib.p65 11 21/11/2001, 15:46