PREPARATION FOR USE
POWER SOURCES
This personal CD player with digital tuner is designed to operate on two alkaline “AA” batteries, or on an optional AC adapter, not included. Attempting to operate this unit on any other power source may cause damage to the unit and such damage is not covered by your warranty.
INSTALLING THE BATTERIES
The battery compartment is located inside the CD player.
1.) Open the CD door locking hinge as shown and then open the CD door.
Remove the “dummy CD” transit protection card from the CD spindle and discard it.
2.) Press the battery cover locking tab in the direction of the arrow and open the battery cover as shown.
Note: To prevent loss the battery cover cannot be completely removed from the player.
3
HD8003_ib040403.p65 | 3 |
4/4/2003, 14:17
