PREPARATION FOR USE

POWER SOURCES

This personal stereo radio with AM/FM digital tuner is designed to operate on two alkaline “AAA” batteries, not included. Attempting to operate this unit on any other power source may cause damage to the unit and such damage is not covered by your warranty.

INSTALLING THE BATTERIES

The battery compartment is located on the back-side of the radio cabinet.

1.) Press down on the mark on the battery cover and slide the cover in the

direction of the arrow and lift it up.

2.) Insert two fresh “AAA” alkaline batteries in the battery compartment. Be sure to follow the polarity making in the battery compartment. If the batteries are inserted incorrectly the unit will not work.

3.) Replace the battery compartment cover.

WHEN TO CHANGE THE BATTERIES

When the batteries are getting weak, the indicator starts flashing in the display, the batteries are almost exhausted and should be changed as soon as possible. Do not leave weak or exhausted batteries in the radio as they will eventually leak and cause corrosion inside the battery compartment.

3

HK2227BL_120203.p65

3

2/12/2003, 14:21

Page 4
Image 4
Emerson HR2227BL owner manual Preparation for USE, Power Sources, Installing the Batteries, When to Change the Batteries