Emerson LC320EMXF owner manual Control Panel, Terminals

INTRODUCTION

5Control Panel

1. y (power) (p. 13)

Press to turn the unit on and off.

2. CH K/L (p. 14 / p. 15)

Press to select channels or move up (K) / down (L) through the main menu items.

3. SETUP (p. 13)

Press to display the main menu.

4. VOL X/Y (p. 14)

Press to adjust the volume or move right (X) / left (Y) through the main menu items.

				5.	Infrared sensor window
			5		Receives infrared rays transmitted from the remote
			6		control.
			7	6.	POWER ON indicator
					Lights up green when power is on.
VOL	SETUP	CH		7.	STAND BY indicator
					Lights up red when power is off.
4	3	2	1

5Terminals		[Side Panel]
		8. S-Video Input jack (p. 10)
8		S-Video cable connection from an external device.
		9. Video Input jack (p. 11)
9
		RCA video cable connection from an external device.
10		10. Audio Input jack (p. 10 / p. 11)
		RCA audio cable connection from an external device.
		11. HDMI 2 Input jack (p. 8 / p. 9)
11		HDMI connection from HDMI device.
		[Rear Panel]
*		12. AC power cord (p. 12)
	12	Connect to a standard AC outlet to supply power to
		this unit.

1313. Cable management (p. 12)

				Use this holder to bundle the cables.
				14. Component video and Audio Input jack (p. 8 / p. 10)
			14	RCA component video cable and RCA audio cable
				connection from an external device.
19				15. Audio Output jack (p. 11)
				RCA audio cable connection for an external device.
20				16. Audio Input jack for HDMI1 (p. 9 / p. 12)
		15		RCA audio cable connection from a DVI device.
			16	When you connect your PC that has a DVI terminal,
17				use a stereo mini plug-RCA conversion cable as well.
				(For HDMI 1 Input jack only)
18				17. Digital audio Output jack (p. 11)
				Coaxial digital cable connection for a decoder or an
				audio receiver.
	Note:			18. Antenna Input jack (p. 8)
	* service terminal (service use only)			RF coaxial cable connection for your antenna or cable
	• Use this terminal only when a software update is necessary.			TV signal.
	• User should not connect any devices to the service terminal			19. HDMI 1 Input jack (p. 8 / p. 9 / p. 12)
	such as digital camera, keyboard, mouse, etc. (because these			HDMI connection for HDMI or DVI device.
	will not work).
	• The software update is, in most cases, handled by an			When you connect your PC that has a DVI terminal,
	authorized service person or in some circumstances the user			you can enjoy this unit as a PC monitor.
	may be asked to do the software upgrade themselves.			20. HDMI 3 Input jack (p. 8 / p. 9)
6				HDMI connection from HDMI device.

EN