!WARNING
Safety Instructions
To avoid fire, shock, and serious personal injury, follow all instructions carefully.
1.Read your Owner's Manual carefully before installing the light fixture. Retain Owner's Manual for future reference.
2.Be careful of the fan and blades when cleaning, painting, or working near the fan. Before installing or servicing the light fixture or ceiling fan, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel.
3.Do not exceed the wattage indicated on fixture.
ADDITIONAL SAFETY INSTRUCTIONS FOR INSTALLATION
1.To avoid possible electrical shock be sure electricity is turned off at the main fuse or circuit breaker box before wiring.
2.Make certain no bare wires are exposed outside the wire connectors.
3.All wiring must conform to national and local electrical codes.
4.Follow the recommended instructions for the proper method of wiring your new light fixture. If you feel you do not have enough electrical wiring knowledge or experience, have your light fixture installed by a licensed electrician. Any electrical work not described in this manual should be performed by a licensed electrician.
To reduce the risk of possible fire and electrical shock, install only on Emerson “CF” Series Ceiling Fans. This light kit is not to be used with CF652, CF653, CF654, CF670, CF680, CF690, CF695, CF742, CF800 and CF2000 Model Ceiling Fans installed in damp or wet locations.
Assembly and Installation
How To Order Repair Parts
When ordering repair parts, always give the following information:
-Name of Item
-Part Description
-Model Number
The model number will be found on a label attached to the light kit fitter. For repair parts, phone:
Notes
!WARNING
Do not install or use the light fixture if any part is missing or damaged. Call
1-800-654-3545
!WARNING
To avoid possible electrical shock, be sure electricity is turned off at the main fuse or circuit breaker box before wiring.
NOTE: The GU24 fluorescent bulbs for this light fixture are not dimmable. Wall controls and remote controls with a light dimming function should not be used in conjunction with this light kit.
2 | 7 |
