IntelliGear Plus™ Variable Speed MD Gearmotors

2 - Installation

After connection, ensure that the seals are firmly in place, and that the screws and cable glands are watertight to ensure drive protection. Clear any condensation from the drain holes at the bottom of the motor.

2.1 - General

The IntelliGear Plus is usually fitted to the gear and mounted to the machine with flange or foot mounting. The motor fan cools the whole assembly. Make sure that the ventilation air

inlet is free of obstruction.

3 - Connections

Connection with copper conductor only.

Removable screws in terminal block:

•Tightening torque = 2.62 in. lbs.

•Maximum cross section = 17 AWG

3.2Power terminal blocks

3.2.1Terminal block for power supply PB1 (marked L&N)

This terminal block is used to connect the 3 phase power supply when the RFI filter is not used in an IntelliGear Plus. Otherwise, the RFI filter output is screwed onto this connector and the power supply should be attached to the terminals located on top of the filter. (See table below)

3.1- Control Terminal Blocks

•Remove the terminal block from it’s fixed holder (unplugged) before making any connections, to avoid putting pressure on the card.

CAUTION: The IntelliGear Plus has a positive logic configuration. Using a drive with a control system which has a different control logic may cause unwanted starting of the motor.

•The control circuits in the drive are isolated from the power circuits by single insulation (IEC 664-1).

•The installer must ensure that the external control circuits are isolated against any human contact.

•If the control circuits need to be connected to circuits conforming to SELV safety requirements, additional insulation must be inserted to maintain the SELV classification.

Numbered Controller

Terminal Blocks

Screw terminal blocks

310M & 31M

Tightening Torque

7.1 in. lbs.

Max. cross-section

AWG 14

Terminal Block

for Power Supply

7

Page 6 Page 8
Page 7
Image 7
Emerson BW1, MD manual Installation, General, Connections, Control Terminal Blocks
Page 6 Page 8

BW1, MD specifications

Emerson MD, also known as BW1, is a notable location within the realm of technological development and innovation. This area is distinguished by its commitment to fostering advanced technologies, attracting startups and well-established enterprises alike. The combination of a strategic location and a highly skilled workforce makes Emerson MD a prime destination for companies looking to thrive in a competitive landscape.

One of the primary characteristics of Emerson MD is its focus on the integration of smart technologies. Businesses in the region often leverage the Internet of Things (IoT) to optimize operations and enhance sustainability. From smart supply chain management to energy-efficient solutions, the application of IoT technologies greatly contributes to operational efficiency and cost savings. Furthermore, the area is witnessing a rise in the adoption of artificial intelligence and machine learning, with companies utilizing these innovations to analyze data, improve customer experiences, and drive decision-making processes.

Emerson MD is also known for its emphasis on collaboration among tech entities. Co-working spaces and incubators provide a fertile ground for entrepreneurs and innovators to exchange ideas, share resources, and collaborate on projects. This collaborative atmosphere fosters a sense of community and encourages experimentation, allowing startups to pivot and adapt swiftly to market demands.

The area boasts robust infrastructure, ensuring reliable connectivity and accessibility for businesses. High-speed internet availability allows companies to harness cloud-based solutions and software applications that enhance productivity. Moreover, Emerson's location is strategically positioned near major transportation hubs, enabling efficient distribution channels that are crucial for logistics and supply chain management.

Sustainability is a significant aspect of Emerson MD's development ethos. Many organizations in the area prioritize green technologies, implementing eco-friendly practices that reduce carbon footprints. This commitment to sustainability not only benefits the environment but also resonates with consumers who increasingly value corporate responsibility.

In conclusion, Emerson MD, BW1, is a vibrant hub of technology and innovation, defined by its adoption of advanced technologies, collaborative spirit, strong infrastructure, and commitment to sustainability. Whether you are a startup seeking to establish your footprint or an established corporation looking to innovate, Emerson MD offers an environment ripe for growth and success. The future looks promising for this dynamic location as it continues to attract talent and investment, further solidifying its role in the tech landscape.
Top Page Image Contents