![Space to be approximately](/images/new-backgrounds/87151/871519x1.webp)
Determine Left or Right
Shelving Location.
Bottom Track Leg Toward
Outside of Shower
Space to be approximately
3/4" (1.9 cm) on each end. Tape to hold placement of bottom track.
Storage
Column Side
Bottom Track
Rail
Track Extension
2. Determine the Installation Con®guration
NOTE: Determine the con®guration of your installation.
The storage shelves may be mounted on either side of the installation.
3. Locate the Bottom Track
NOTE: Make sure the gap in the bottom track assembly is positioned on the storage column side of the threshold. If needed, remove the rail and track extension and reinstall them in the opposite end of the track.
Place the bottom track on the ¯attest part of the bath/shower ledge with the leg toward the outside of the shower.
Position the bottom track so there is a 3/4″ (1.9 cm) equal gap between each wall and the ends of the bottom track.
Temporarily secure the bottom track to the ledge with masking tape.
Sterling | 5 |