IMPORTANT SAFETY INSTRUCTIONS

(Cont.)

a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

12.Do not use the telephone to report a gas leak in the vicinity of a leak.

13.Do not allow anything to rest on power cord. Do not locate this product

where the cord will be abused by persons walking on it.

14.Do not dispose of the battery(ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

CAUTION

To Reduce the risk of Fire or Injury to Persons, Read and Follow these instructions.

1.Use alkaline battery(ies) of size indicated in the battery compartment.

2.Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

3.Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.

4.Do not attempt to recharge the battery(ies) provided or identified for use with this product. The batteries may leak corrosive electrolyte or explode.

5.Do not attempt to rejuvenate the battery(ies) provided with or identified for use with this product by heating them. Sudden release of the battery electrolyte may occur causing burns or irritation to the eyes or skin.

6.When replacing batteries, all batteries should be replaced at the same time. Mixing fresh and discharged batteries could increase internal cell pressure and rupture the discharged battery(ies). (Applies to product employing more than one separately replaceable primary battery).

7.When inserting batteries into this product, the proper polarity or direction must be observed. Reverse insertion of batteries can cause charging, and that may result in leakage or explosions. (Applies to product employing more than one separately replaceable primary battery).

8.Remove the batteries from this product if the product will not be used

4

Page 3 Page 5
Page 4
Image 4
Emerson MODEL EM1200 owner manual Cont
Page 3 Page 5

MODEL EM1200 specifications

The Emerson MODEL EM1200 is a high-performance device aimed at modern industrial applications, particularly in the fields of automation and process control. This model stands out due to its impressive combination of features, technologies, and characteristics designed to optimize efficiency and reliability.

One of the main features of the EM1200 is its advanced microprocessor technology. This allows for rapid data processing and real-time monitoring, which is essential in dynamic industrial environments. The device boasts a high-speed communication capability, ensuring that data is transmitted efficiently across various networks. This is particularly useful for integration into existing systems.

In terms of connectivity, the EM1200 supports multiple communication protocols, including Modbus, Ethernet/IP, and Profibus, enabling seamless integration with a wide range of peripherals and systems. This flexibility ensures that the device can be adapted to different operational requirements, providing users with a versatile solution for their automation needs.

The EM1200 is equipped with robust data logging capabilities, allowing operators to capture and analyze process data over time. This feature not only aids in troubleshooting but also facilitates performance optimization by enabling predictive maintenance strategies. The logging system can be customized, offering diverse options for data points, sampling rates, and storage duration.

Another significant characteristic of the EM1200 is its user-friendly interface. The device is designed with an intuitive control panel and a graphical display that simplifies operation and monitoring. Users can easily navigate through settings, view performance metrics, and access historical data, which enhances usability for operators of varying skill levels.

Durability is also a key component of the EM1200's design. Built to withstand harsh industrial environments, it features an IP67 rating, protecting against dust and water ingress. This ensures reliable performance in demanding conditions, making the device suitable for a wide range of applications, from manufacturing to energy management and beyond.

In conclusion, the Emerson MODEL EM1200 combines advanced microprocessor technology, comprehensive connectivity options, robust data logging, a user-friendly interface, and exceptional durability. These features make the EM1200 an ideal choice for organizations looking for a reliable and versatile solution to enhance their automation and process control efforts. Its commitment to performance and flexibility positions it as a leader in its class, meeting the evolving needs of modern industries.
Top Page Image Contents