1 Unpack box contents

Deluxe Earbud

MP120/MP320 Player

Headphones

USB Cable

Pouch

Armband

Quick Start Guide

Warranty

 

Information

 

Warranty Card

2 Insert the battery (not included)

1.Slide the battery compartment cover as shown.

2.Insert one fresh "AAA" alkaline battery in the battery compartment. Be sure to follow the polarity marking in the battery compartment. If the battery is inserted incorrectly the unit will not work.

3.Slide the battery compartment into place.

When the battery is getting weak, the indicator changes from "" (full battery) to "" (replace battery) in the display, the battery is almost exhausted and should be changed as soon as possible. Do not leave weak or exhausted battery in the player as it will eventually leak and cause corrosion inside the battery compartment.

3

1

2"AAA"

BATTERY

3 Connect player to your computer

1. Remove cap.

2. Place USB connector of player into female side of the USB extension cord (A). Plug the other end of the extension cord (B) into an open USB port in computer.

NOTE: Player can be connected directly to computer if space permits.

1

2 A

B

4 Transferring music and data files

1.Confirm player is powered up and connected to computer.

2.On your Desktop, double-click the "My Computer" icon.

3.Drag and drop files onto the MP120/MP320 drive ("Removable Disk").

NOTE: The player stores all types of formatted files. However, it will only play MP3, WMA™, and WMA™ with DRM™ (copy protected) formatted files.

NOTE: To transfer WMA™ with DRM™ formatted files to MP120/MP320, please visit www.emersonradio.com for details.

Your player will have slightly less memory available than stated due to the necessary memory needed for its firmware.

NOTE: If you are using Windows® 98, you must first download and install the driver from www.emersonradio.com.

2

3

5 Use your MP120/MP320 as a MP3 player

1.Unplug player from the USB cord. Make sure you have at least one MP3 or WMA™ file already stored on the player.

2.Make sure the HOLD switch is in the off position (A) and that the player is on (B).

3.Connect the earbuds to the headphone jack.

4.Press the POWER/PLAY/PAUSE/STOP button to begin playing an audio track.

3

2 A HOLD 'Off'

3.5mm

1

4

2 B PRESS & HOLD TO POWER ON

6 How to operate your player

Power on the unit: Press and hold the POWER/PLAY/ PAUSE/STOP button for approximately 2 seconds.

To play track: Press the POWER/PLAY/PAUSE/STOP button.

To select a different track: Press the FWD or REV

buttons.

To search through a track: Press and hold the FWD or

REV buttons.

To momentarily pause track: Press the POWER/PLAY/PAUSE/ STOP button when track is playing. indicator appears.

To resume track: Press the POWER/PLAY/PAUSE/STOP button when track is paused.

To adjust volume: Press the VOL + or - buttons.

To stop track: Press and hold the POWER/PLAY/ PAUSE/STOP button for approximately 2 seconds when track is playing.

Power off the unit: Press and hold the POWER/PLAY/ PAUSE/STOP button for approximately 5 seconds .

To lock the buttons from accidentally being pressed: Slide

the HOLD switch to the on position. indicator appears.

Page 2
Image 2
Emerson MP120, MP320 quick start Unpack box contents, Insert the battery not included, Connect player to your computer