5.) Repeat steps 3 and 4 selecting the desired Disc number and Track number each time until you have entered up to 20 tracks in the CD program memory.

NOTE: You may also select the track numbers directly with the 1-9 number buttons on the remote control.

For tracks 1 through 9, simply press the corresponding number button.

For tracks 10 and higher first press the “+10” button and then the corresponding button for the second digit.

For track 12, press “+10” and then press “2”.

For track 23 press “+10” twice, then press “3”.

6.) Press the PLAY/PAUSE button to begin programmed playback.

The MEMORY indicator stops flashing and remains on. The player will play the track that you programmed in the desired sequence.

After the last programmed track has

played the player stops, but the display returns to the flashing P-01”.

To play the programmed sequence again, press the PLAY/PAUSE button.

To cancel the programmed sequence from the memory press the BAND button while the display is flashing.

STOP/

The Program sequence can also be cleared from the memory by opening the CD door.

30

MS3108_062806.p6530

28/6/2006, 16:54

Page 31
Image 31
Emerson MS3108C owner manual Stop