Programmed Playback
The Programmed Playback feature allows you to program a total of up to 20 tracks from among all 3 discs for playback in any desired order. You may program the same track to play several times within a program sequence if desired.
NOTE: You cannot program tracks during playback. If a disc is playing press
the STOP/BAND button first to stop playback before beginning the programming steps below.
1.) Load up to 3 discs in the player and wait until the player has read the Table of Contents of all discs.
2.) Press the MEMORY/CLOCK ADJ. button.
The MEMORY indicator and Program Memory P- 01 will flash and the display will show DISC 1, Track 00.
3.) Press one of the CD buttons to select the disc that contains the first track to be programmed. (Example: DISC 3).
Then press the or buttons to select the first track on that disc to be programmed. (Example: Track 7).
4.) Press the MEMORY/CLOCK ADJ. button again to enter DISC 3 / Track 7 in program memory. The program memory number advance to “P- 02”.
29
MS3108_062806.p6529
28/6/2006, 16:54